Wacom DTF-720 Do not use organic solvents to clean this product, Do not let the product get wet

Page 4

Caution

Do not use organic solvents to clean this product.

When cleaning the product, never use such organic solvents as alcohol. Such solvents may cause discoloration and deterioration in quality.

Do not let the product get wet.

Please do not place containers such as cups and vases containing water near the product. Coming in contact with water or other liquids may cause product failure.

When cleaning this product, always disconnect the USB connector.

When cleaning the product, always disconnect the USB connector from the USB port of the computer. Failure to do so may result in electric shock.

While this product is in use, avoid placing any metal objects on it.

Do not place any metal objects on the product while you are using it. This may result in malfunction or product failure.

Do not touch any liquids that may be leaking from this product.

The liquid contained in the product is an irritant. In the unlikely case that such liquid should leak, never touch it with bare hands. In case of contact with skin, mouth or eyes, rinse immediately with running water and continue rinsing for 15 minutes or longer. Also consult a physician.

Do not use excessive force with the cable.

Please do not step on, or place heavy objects on any of the product’s cables. Also, do not apply excessive force to the base of the cable or repeatedly bend and stretch it, as this may cause it to break or malfunction.

D o n o t p l a c e t h e p r o d u c t o n

unstable surfaces.

Do not place the product where it is likely to totter, lean or be exposed to strong vibrations. Doing so may lead to the product falling, resulting in injury and/or product failure.

Do not place heavy objects on the product.

Do not put excessive weight, or place heavy objects on the product. These actions may cause product failure.

When connecting the power plug

When plugging the power adapter into an electrical outlet, also connect a grounded wire.

When not using this product for a long period of time

For safety reasons, when you will not be using the product for a considerable length of time, disconnect the power adapter from the electrical outlet.

Do not use this product in a dusty environment.

Dust can cause damage to the product.

Do not block the ventilation holes on the backside of the product.

Blocking these holes may cause internal overheating and subsequent damage.

Do not pick up the product by its stand.

If excessive force is used in handling the stand, its open and close function may become damaged. When picking up the product, always pick it up by the body.

Regarding the Pen

-Do not strike hard objects with the metal Pen. Doing so may cause damage to the product.

-Be careful to not allow small children to put either the pen or the spare nib into their mouths. There is the danger that the nib or side switch may be accidentally swallowed or that the pen may be damaged.

Do not place the product in either very hot or very cold places.

Do not place the product in very hot (35 degrees centigrade or more) or very cold (5 degrees centigrade or less) locations. Also, avoid placing it in locations with severe temperature fluctuations as this may adversely affect the product and cause product failure.

Do not disassemble the product.

Do not disassemble or modify the product, as these actions may lead to fi re, excessive generation of heat, electrical shock or injury. The guarantee on the product will become null and void if the product is ever disassembled.

3

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 4
Contents PL-720 Table of Contents PL-720 Users GuideRegarding the power plug and power adapter Safety PrecautionsDo not open the back cover Do not use organic solvents to clean this product When connecting the power plugWhen not using this product for a long period of time Do not let the product get wetWarranty Exclusions Please be aware of the following regarding the LCD displayFront Component FunctionsBack Adjusting the Stand Installing PL-720 on a Mount ArmAccessory Check Connecting PL-720 Computer Windows Setup Installing PL-720 DriverInstalling the Tablet Driver Mac OS X Setup Uninstalling the Tablet DriverWindows MacintoshPL-720 Power Saving Function Auto-Adjust FunctionPL-720 Display Procedure Blurring and Protrusion of the Picture from the LCD PanelHow to Use the OSD Menu On-Screen Display OSD Menu ButtonsReset Types of OSD MenusContrast Language Brightness BacklightHorizontal Center Phase Vertical Center PitchHow to use the Tablet Buttons Basic operationComponent Functions Name FunctionUsing the Control Panel Displaying the Control PanelControl Panel Basics Opening the Control Panel in WindowsSwitch and Button Settings Function Names DescriptionCustomizing the Pop-up Menu Open/RunSynchronizing the Positions of the Pen Tip and Pointer If Another Monitor Name is Displayed in the Monitor Field Using Multiple Interactive Pen Displays【Important】 Supplementary Information Removing StainsReplacing the Pen Nib Remove the pen nib Insert a new nibTroubleshooting Display TroubleshootingIf One of These Messages Should Appear If One of These Conditions Should AppearTroubleshooting for Windows General TroubleshootingCondition Troubleshooting for Macintosh SpecificationObtaining Technical Support