JVC KS-K6001, KS-K6002 manual It is recommended to preset

Only for KS-K6002: An optional hard-wired FM transmitter—FM Switching Box Assembly (Parts No. 112C3159) is available. By connecting this Assembly between the FM OUT terminal of the cradle and the antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception.

BIf your car stereo has a line input (LINE IN or AUX)...

Plug the supplied audio cord into the back of the cradle—AUDIO OUT.

•Plug the audio cable’s white (L ch) and red (R ch) connectors into your car stereo.

4For KS-K6002:

Activate the FM signal transmitter (refer to page 24 of KT-SR1000’ Instructions), and set the FM frequency output selector to select one of the following frequencies—88.1 MHz, 88.3 MHz, 88.5 MHz, and 88.7 MHz.

88.1	• It is recommended to preset
88.3	the frequency selected by the
88.5

88.7	FM frequency output
MHz
	selector into your car stereo
	so you can easily tune in to
	the frequency.

Note: You can also connect a cassette adapter or an audio cord (both not supplied) to the AUDIO OUT jack to send the singals to your car stereo.

7