^@ Command - Reset Printer

Description This command is used to reset the printer.

Syntax ^@￿

:where ^is 94 decimal

This command emulates Power Off and then

Power On; thus reinitializing the printer.

·The reset command is unavailable during the operation of storing PCX graphics, soft fonts or while the printer is in dump mode.

·The reset command cannot be used in a stored form.

·The reset command can be sent to the printer during all other printing operations.

·The printer will ignore all commands sent while the reset command is executing, up to 2 seconds.

Example: ^@￿

:The printer will reset

980352-001 Rev.A

3-111

Page 129
Image 129
Zebra Technologies EPL2 manual @ Command Reset Printer, Description This command is used to reset the printer, Example @