Zebra Technologies EPL2 Command Speed Select, Syntax Sp1, Parameters p1 = Speed select value

SCommand - Speed Select

Description Use this command to select the print speed.

Syntax Sp1

Parameters p1 = Speed select value.

	Model	Value	Speed
	2722	0	1.0 ips (25 mm/s)
	2742	1	1.5 ips (37 mm/s)
	3742	2	2.0 ips (50 mm/s)
		1	1.5 ips (37 mm/s)
	2824	2	2.0ips (50 mm/s)
	2844	3	2.5 ips (63 mm/s)
		4	3.5 ips (83 mm/s)
		1	1.5 ips (37 mm/s)
	2443 (Orion)	2	2.0ips (50 mm/s)
		3	2.5 ips (63 mm/s)
		2	2.0 ips (50 mm/s)
	2746	3	3.0 ips (75 mm/s)
		4	4.0 ips (100 mm/s)
	2348
		5	5.0 ips (125 mm/s)
		6	6.0 ips (150 mm/s)
		1	1.0 ips (25 mm/s)
	2684 (Strata)	2	2.0 ips (50 mm/s)
		3	3.0 ips (75 mm/s)
		4	4.0 ips (100 mm/s)
Example: S2￿	:selects 2 ips (50 mmps)

3-86 980352-001 Rev.A