Toshiba SPAA-207-R1, TSMB0039901 Connectors, DC24V Socket connector, Serial interface connector

Page 11

3. APPEARANCE

SPAA-207-R1 3. 3 Connectors

3.3 Connectors

CAUTION!

1.The drawer interface connector is exclusively for connecting the drawer. Do not connect a phone line or any other cables than the drawer cable to this connector. Doing so may cause a failure of the phone line and this printer.

2.To the DC24V connector (socket connector), do not connect anything other than the built-in AC adapter.

3.The built-in AC adapter is exclusively for this printer. Do not use it for any other machines.

4

1

2

3

1 [DC24V] (Socket connector)

The built-in AC adapter supplies +24V power to the printer through this connector. Do not connect anything other than the TOSHIBA TEC Specified AC adapter.

2 [Serial interface connector]

An interface cable which connects the printer to a POS terminal or Personal Computer is connected to this connector. A RS-232C interface cable (Serial I/F model) is needed for this connector.

3 [USB interface connector]

An interface cable which connects the printer to a POS terminal or Personal Computer is connected to this connector. A USB I/F (V2.0 Full Speed) is needed for this connector.

4 [Drawer interface Connector] [CDKO] (6 pin modular connector)

A drawer cable which connects the printer to a drawer is connected to this connector. To this connector, a TOSHIBA drawer can be connected. Do not connect anything other than the connectable drawer.

NOTE: For connectable drawers, refer to your nearest authorized TOSHIBA TEC representative.

3-3

Image 11
Contents TRST-A10 Series CE Compliance for EU only Safety Summary Request Regarding Maintenance PrecautionsTable of Contents Introduction FeaturesProduct Overview Mm Paper SpecificationsPrinter DescriptionReceipt Roll LED and Feed Button AppearanceFront/Rear View Problem What to Do Where to Go USB interface connector ConnectorsDC24V Socket connector Serial interface connectorRequirements for Operation SET UP ProcedureRS-232C cable pin configuration Strobe Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Ground terminal 6-pin modular connector Connecting the DrawerDrawer interface connector 6-pin modular connector Loading the Receipt Roll Edge Exit Self Test PrintRolling Ascii print test Receipt Print test Receipt Duty check print test Receipt 00000008Print current setting Current Setting FormCleaning General MaintenanceRemoving Jammed Paper Solution TroubleshootingProblem Check Point Waste Recycling information for users

SPAA-207-R1, TRST-A10 SERIES, TSMB0039901 specifications

The Toshiba TSMB0039901, part of the TRST-A10 Series, is a high-performance semiconductor device designed for a range of electronic applications. Renowned for its reliability and robust characteristics, this component is particularly suited for power management in various consumer and industrial electronics.

One of the main features of the TSMB0039901 is its outstanding thermal management capabilities. Designed to operate efficiently across a wide temperature range, it ensures stable functionality even under high-stress conditions. This is critical for applications in automotive electronics, industrial automation, and consumer gadgets where temperature fluctuations can impact performance.

The TRST-A10 Series incorporates advanced technologies, including Toshiba’s proprietary MOSFET structure, which enhances its switching efficiency. This leads to reduced power loss during operation, making the device an excellent choice for energy-efficient designs. The low on-resistance characteristic minimizes heat generation, contributing to the longevity of the component itself and the overall system efficiency.

In terms of electrical performance, the TSMB0039901 boasts high-speed operation, making it adept at handling rapid switching tasks. Its fast recovery time facilitates increased performance in high-frequency applications, such as wireless communication systems and data processing units. This ensures that devices powered by the TSMB0039901 can operate smoothly and responsively.

A notable characteristic of the TRST-A10 Series is its integration capabilities. The TSMB0039901 is designed for seamless incorporation into various electronic architectures, whether in series with other components or as part of a more extensive circuit. This flexibility makes it ideal for engineers seeking to optimize their designs without extensive modification.

The TSMB0039901 is also compliant with international safety and environmental standards, ensuring that devices developed using this semiconductor meet stringent regulations. This dedication to safety ensures that manufacturers can trust the TSMB0039901 in applications where reliability is paramount.

Overall, the Toshiba TSMB0039901 from the TRST-A10 Series offers an impressive combination of thermal management, power efficiency, and high-speed operation. These features position it as a versatile and dependable solution for modern electronic design needs, accommodating a wide range of applications across different sectors, from consumer electronics to industrial systems.