Toshiba TSMB0039901, TRST-A10 SERIES, SPAA-207-R1 owner manual Edge

Page 21

5. INSTALLATION PROCEDURE

SPAA-207-R1 5.3 Loading the Receipt Roll

1)Turn the printer power ON.

2)Hold the raised sides firmly and lift upwards to unhook the printer cover. (1)

3)Hold both sides of the printer cover and open it until it stops. (2)

4)Check for the correct orientation of the receipt roll, and put it into the paper holder.

Pull the receipt until it extends past the paper outlet for about 5 cm (3), and then close the printer cover by pressing it’s front center gently until a positive lock is felt.

Print Cover

1

Raised

edge

 

 

2

3

Receipt Roll

CAUTION!

1.Use only TOSHIBA TEC specified paper. Use of non-specified paper may shorten the print head life resulting in problems with print quality, cause a paper feed failure, or shorten the cutter life.

2.Do not subject the thermal receipt roll to water, oil, or heat source as this will darken the paper.

3.Load the receipt roll in the correct orientation. Failure to do this may cause a paper jam error.

4.Care must be taken not to damage the print head and platen when the printer cover is opened as this may cause a poor print or a printer failure.

5.Do not open the printer cover while the printer is printing.

6.Do not hold the receipt while the printer is printing. Doing so may cause a paper jam.

7.When closing the printer cover, do not press it down too hard.

8.Do not put anything on the printer cover or push the cover too strongly. Doing so may cause a print failure.

5-6

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TRST-A10 Series CE Compliance for EU only Safety Summary Request Regarding Maintenance PrecautionsTable of Contents Features Product OverviewIntroduction Printer SpecificationsDescription Mm PaperReceipt Roll Appearance Front/Rear ViewLED and Feed Button Problem What to Do Where to Go DC24V Socket connector ConnectorsSerial interface connector USB interface connectorRequirements for Operation SET UP ProcedureRS-232C cable pin configuration Strobe Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Connecting the Drawer Drawer interface connector 6-pin modular connectorGround terminal 6-pin modular connector Loading the Receipt Roll Edge Exit Self Test PrintRolling Ascii print test Receipt Print test Receipt Duty check print test Receipt 00000008Print current setting Current Setting FormCleaning General MaintenanceRemoving Jammed Paper Troubleshooting Problem Check PointSolution Waste Recycling information for users

SPAA-207-R1, TRST-A10 SERIES, TSMB0039901 specifications

The Toshiba TSMB0039901, part of the TRST-A10 Series, is a high-performance semiconductor device designed for a range of electronic applications. Renowned for its reliability and robust characteristics, this component is particularly suited for power management in various consumer and industrial electronics.

One of the main features of the TSMB0039901 is its outstanding thermal management capabilities. Designed to operate efficiently across a wide temperature range, it ensures stable functionality even under high-stress conditions. This is critical for applications in automotive electronics, industrial automation, and consumer gadgets where temperature fluctuations can impact performance.

The TRST-A10 Series incorporates advanced technologies, including Toshiba’s proprietary MOSFET structure, which enhances its switching efficiency. This leads to reduced power loss during operation, making the device an excellent choice for energy-efficient designs. The low on-resistance characteristic minimizes heat generation, contributing to the longevity of the component itself and the overall system efficiency.

In terms of electrical performance, the TSMB0039901 boasts high-speed operation, making it adept at handling rapid switching tasks. Its fast recovery time facilitates increased performance in high-frequency applications, such as wireless communication systems and data processing units. This ensures that devices powered by the TSMB0039901 can operate smoothly and responsively.

A notable characteristic of the TRST-A10 Series is its integration capabilities. The TSMB0039901 is designed for seamless incorporation into various electronic architectures, whether in series with other components or as part of a more extensive circuit. This flexibility makes it ideal for engineers seeking to optimize their designs without extensive modification.

The TSMB0039901 is also compliant with international safety and environmental standards, ensuring that devices developed using this semiconductor meet stringent regulations. This dedication to safety ensures that manufacturers can trust the TSMB0039901 in applications where reliability is paramount.

Overall, the Toshiba TSMB0039901 from the TRST-A10 Series offers an impressive combination of thermal management, power efficiency, and high-speed operation. These features position it as a versatile and dependable solution for modern electronic design needs, accommodating a wide range of applications across different sectors, from consumer electronics to industrial systems.
Top Page Image Contents