Toshiba TSMB0039901, TRST-A10 SERIES, SPAA-207-R1 owner manual Setting up the Printer

Page 15

4. SET UP PROCEDURE

SPAA-207-R1 4.2 Setting up the Printer

4.2 Setting up the Printer

CAUTION!

1.Place the printer on a flat, stable surface.

2.Do not place the printer close to a heater or where it may be exposed to direct sunlight.

3.Avoid locations where the printer may be exposed to high temperature, high humidity or dust. 4.Care must be taken that no condensation occurs in the printer. If it should, however,

do not turn ON the power until the condensation is dried.

5.Use a grounded electrical outlet. Do not use an adapter plug.

6.Be sure that there is adequate room around the printer for easy operation and maintenance.

7.Keep your work environment static free.

1)Make sure that the printer power is turned OFF.

2)Connect the interface cable to the printer.

3)Insert the power cord into the AC inlet.

4)Connect the interface cable to a TOSHIBA POS terminal, and plug in the power cord to the AC outlet.

5)If a drawer is desired to be connected, connect the drawer interface cable to the printer.

6)Secure the drawer ground wire to the ground terminal on the rear of the printer.

7)Turn the printer power ON.

8)Open the printer cover.

9)Load the receipt roll into the printer.

10)Close the printer cover. One receipt will be automatically issued.

11)Check the print quality by performing a self test print.

Now the printer is ready for printing.

NOTES:

1.For details of the above Steps 1) to 4), refer to Section 5.1 Connecting the Power Cord and Interface Cables.

2.Steps 5) and 6) are the procedures of the drawer connection. For details of Steps 5) and 6), refer to Section 5.2 Connecting the Drawer.

3.For details of Steps 8) to 10), refer to Section 5.3 Loading the Receipt Roll.

4.For details of Step 11), refer to Section 5.4 Self Test Print.

4-4

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TRST-A10 Series CE Compliance for EU only Safety Summary Request Regarding Maintenance PrecautionsTable of Contents Features Product OverviewIntroduction Mm Paper SpecificationsPrinter DescriptionReceipt Roll Appearance Front/Rear ViewLED and Feed Button Problem What to Do Where to Go USB interface connector ConnectorsDC24V Socket connector Serial interface connectorRequirements for Operation SET UP ProcedureRS-232C cable pin configuration Strobe Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Connecting the Drawer Drawer interface connector 6-pin modular connectorGround terminal 6-pin modular connector Loading the Receipt Roll Edge Exit Self Test PrintRolling Ascii print test Receipt Print test Receipt Duty check print test Receipt 00000008Print current setting Current Setting FormCleaning General MaintenanceRemoving Jammed Paper Troubleshooting Problem Check PointSolution Waste Recycling information for users

SPAA-207-R1, TRST-A10 SERIES, TSMB0039901 specifications

The Toshiba TSMB0039901, part of the TRST-A10 Series, is a high-performance semiconductor device designed for a range of electronic applications. Renowned for its reliability and robust characteristics, this component is particularly suited for power management in various consumer and industrial electronics.

One of the main features of the TSMB0039901 is its outstanding thermal management capabilities. Designed to operate efficiently across a wide temperature range, it ensures stable functionality even under high-stress conditions. This is critical for applications in automotive electronics, industrial automation, and consumer gadgets where temperature fluctuations can impact performance.

The TRST-A10 Series incorporates advanced technologies, including Toshiba’s proprietary MOSFET structure, which enhances its switching efficiency. This leads to reduced power loss during operation, making the device an excellent choice for energy-efficient designs. The low on-resistance characteristic minimizes heat generation, contributing to the longevity of the component itself and the overall system efficiency.

In terms of electrical performance, the TSMB0039901 boasts high-speed operation, making it adept at handling rapid switching tasks. Its fast recovery time facilitates increased performance in high-frequency applications, such as wireless communication systems and data processing units. This ensures that devices powered by the TSMB0039901 can operate smoothly and responsively.

A notable characteristic of the TRST-A10 Series is its integration capabilities. The TSMB0039901 is designed for seamless incorporation into various electronic architectures, whether in series with other components or as part of a more extensive circuit. This flexibility makes it ideal for engineers seeking to optimize their designs without extensive modification.

The TSMB0039901 is also compliant with international safety and environmental standards, ensuring that devices developed using this semiconductor meet stringent regulations. This dedication to safety ensures that manufacturers can trust the TSMB0039901 in applications where reliability is paramount.

Overall, the Toshiba TSMB0039901 from the TRST-A10 Series offers an impressive combination of thermal management, power efficiency, and high-speed operation. These features position it as a versatile and dependable solution for modern electronic design needs, accommodating a wide range of applications across different sectors, from consumer electronics to industrial systems.
Top Page Image Contents