Toshiba TRST-A00 owner manual SET UP Procedure, Requirements for Operation, Serial Interface Type

4. SET UP PROCEDURE

EO1-13027

4.1 Requirements for Operation

4. SET UP PROCEDURE

4.1 Requirements for Operation

This printer has the following requirements:

Serial Interface Type

The TOSHIBA POS terminal or Personal Computer to be connected must have a serial port.

To communicate with the TOSHIBA POS terminal or Personal Computer, an RS-232C interface cable is required.

RS-232C cable....... 9 pins

USB Interface Type

The TOSHIBA POS terminal or Personal Computer to be connected must have a USB port.

To communicate with the TOSHIBA POS terminal or Personal Computer, a USB cable is required.

Interface Cables

For the serial interface model, use the RS-232C cable which satisfies the following pin configuration and the specification of the connector.

For the USB interface model, use the USB cable which satisfies the following pin configuration and the specification of the connector.

To prevent the emission and receipt of electrical noise, the interface cable must meet the following requirements:

•Fully shielded and fitted with metal or metalized connector housings.

•Kept as short as possible.

•Should not be tightly bundled with the power cord.

•Should not be tied to power line conduits.

4-1