Toshiba TRST-A00, TRSTA00UCQMR owner manual Error Status Table, Problem What to Do Where to Go

Page 15

3. APPEARANCE

 

 

EO1-13027

 

 

3. 2 LED and Feed Button

 

 

 

 

Error Status Table

 

 

 

Blue LED Blinking (Slow)

 

 

 

 

 

 

 

Problem

What to Do

Where to Go

Receipt paper is low

There are about 4 ½ meters, ± 3 meters,

See “Loading the

 

 

(15 feet, ± 10 feet) of paper left. Change

Receipt Roll” in

 

 

the paper soon to avoid running out of

chapter 5.3.

 

 

paper half way through a transaction.

 

 

Blue LED Blinking (Fast)

 

 

 

 

 

 

 

Problem

What to Do

Where to Go

Receipt paper is out

Change the paper now. Do not run a

See “Loading the

 

 

transaction without paper as the data

Receipt Roll” in

 

 

may be lost.

chapter 5.3.

 

Receipt cover is open

Close the cover. The printer will not

 

 

 

operate with the cover open.

 

 

Knife failure

Open the receipt cover and check the

 

 

 

knife. Clear any jammed paper you can

 

 

 

see. Tear off any excess paper against

 

 

 

the tear-off blade.

 

 

 

 

 

 

NOTE: If other LED status except for the above occurs, turn the power off, and then on. If this does not restore the LED, contact your nearest TOSHIBA TEC representative for assistance.

3-2

Image 15
Contents TRST-A00 Series CE Compliance for EU only Safety Summary Request Regarding Maintenance PrecautionsInterface Cable Power SupplyPower Cord Important Information to the UserNetzanschlußkabel Wichtige BenutzerinformationenNetzgerät VerbindungskabelTable of Contents Features Product OverviewIntroduction Printer Series Applicable ModelTRST-A Model name descriptionAccessory Specifications PrinterMm Paper Model Description OptionsReceipt Roll Rear View AppearanceFront/Rear View LED and Feed ButtonProblem What to Do Where to Go Error Status TableUSB interface connector ConnectorsRS-232C I/F model USB I/F model DC24V Socket connector Serial interface connectorInterface Cables SET UP ProcedureRequirements for Operation Serial Interface TypeRS-232C cable pin configuration Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Connecting the Drawer Drawer interface connector 6-pin modular connectorGround terminal 6-pin modular connector Loading the Receipt Roll Edge Exit Self Test PrintRolling Ascii print test Receipt Print test Receipt Duty check print test Receipt Current Setting Form Print current settingCleaning General MaintenanceRemoving Jammed Paper Check Point TroubleshootingWaste Recycling information for users EO1-13027