Toshiba TRSTA00UCQMR, TRST-A00 owner manual Removing Jammed Paper

Page 32

6. GENERAL MAINTENANCE

EO1-13027

6.2 Removing Jammed Paper

6.2Removing Jammed Paper

1.Turn the power OFF.

2.Open the printer cover.

3.Remove the jammed paper. DO NOT USE any sharp implement or tool as these will damage the printer.

4.Clean the print head and platen, then remove any further dust or foreign objects.

5.Re-load the receipt roll. (Refer to Section 5.3 Loading the Receipt Roll.)

6.After closing the printer cover, turn the power ON. The printer will initialize the auto cutter to restore the printer stand-by.

6-2

Image 32
Contents TRST-A00 Series CE Compliance for EU only Safety Summary Precautions Request Regarding MaintenancePower Supply Power CordImportant Information to the User Interface CableWichtige Benutzerinformationen NetzgerätVerbindungskabel NetzanschlußkabelTable of Contents Introduction FeaturesProduct Overview Applicable Model TRST-AModel name description Printer SeriesAccessory Mm Paper SpecificationsPrinter Options Model DescriptionReceipt Roll Appearance Front/Rear ViewLED and Feed Button Rear ViewError Status Table Problem What to Do Where to GoConnectors RS-232C I/F model USB I/F model DC24V Socket connectorSerial interface connector USB interface connectorSET UP Procedure Requirements for OperationSerial Interface Type Interface CablesRS-232C cable pin configuration Setting up the Printer Installation Procedure Connecting the Power Cord and Interface Cable Installation Procedure Ground terminal 6-pin modular connector Connecting the DrawerDrawer interface connector 6-pin modular connector Loading the Receipt Roll Edge Self Test Print ExitRolling Ascii print test Receipt Print test Receipt Duty check print test Receipt Print current setting Current Setting FormGeneral Maintenance CleaningRemoving Jammed Paper Troubleshooting Check PointWaste Recycling information for users EO1-13027