Toshiba S221, T721, T520, T620, T621, T521E owner manual Connection, How to use the PC card slot

Page 12
To RS-232C terminal

Connection

Before connection

•Read the owner’s manual of the device to be connected to the projector.

•Some types of computer cannot be used connected to this projector. Check for an RGB output terminal, supported signal p.69 , etc.

•Turn off the power of both devices before connection.

•The figure below is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

How to use the PC card slot

Please read this chapter if the model you purchased includes a PC card slot.

The wireless LAN PC card enables you to connect the projector wirelessly with a personal computer that supports IEEE802.11b based wireless LAN. p.33 (Please note that communication between all the computers based on IEEE802.11b and this projector is not guaranteed.) You can also use a commercially available memory card to project JPEG image files using this projector. p.41 Please follow the steps below when removing or mounting a PC card.

Computer

Desktop computer

■Mounting a PC card

qRemove the PC card slot cover.

Press lightly on the circle (“O”) while sliding the cover in the direction of the arrow.

■Removing a PC card

qLook at CARD indicator.

If it is off, proceed to step r.

UNMOUNT button

CARD indicator

To audio output

To USB terminal

p.52

USB cable

Audio cable (for computer) (supplied)

To RGB

RGB cable

output

(supplied)

 

USB

MONITOR1 COMPUTER 2

( Y/PB/PR )

CONTROL

VIDEO

To audio

To RGB

output

output

Monitor cable

Mini D-sub 15P-BNC (not supplied)

Audio cable (not supplied)

Card slot cover

wInsert the PC card.

After making sure of the card orientation, press it in firmly until it stops.

wPress the UNMOUNT button.

Begins processing for PC card removal

eWait until CARD indicator goes out.

Never remove the PC card while lit. Doing so could damage the PC card or corrupt your data.

rPress the Eject button.

Preparations

AUDIO R - AUDIO - L VIDEO S-VIDEO

Control cable

p.71

Yellow

 

(to video output)

To audio output White (L) Red (R)

S-Video cable (not supplied)

AV cable (supplied) To audio

 

output

To S-Video White (L)

output

Red (R)

 

To Y/CB/CR output Green (Y) Blue (CB), Red (CR)

Conversion adapter BNC-pin (not supplied)

PC Card

eReplace the PC card slot cover.

Replace the PC card slot cover to keep dust from entering.

Eject button

The Eject button is a bit stiff, so press firmly while supporting the projector.

Computer (for control)

VCR

DVD player

Notes

•COMPUTER terminals 1 and 2 function identically.

•The AUDIO terminal doubles for devices connected to COMPUTER terminals 1 and 2.

Be careful to avoid injury when doing so.

■ If CARD indicator turns red

CARD indicator

 

 

 

RESET switch

 

 

 

 

 

 

 

Press the RESET switch with a thin pin or similar implement (it is at the bottom of a recess).

22

23

Page 11 Page 13
Image 12
Page 11 Page 13
Contents TLP-T720 TLP-T721 TLP-T620 TLP-T621 TLP-T520 TLP-T521 Power Sources Source of LightVentilation USA onlyImportant Safety Instructions Damage Requiring Service Replacement PartsWhen using a wireless LAN PC card Models Safety CheckPlace and Manner of Installation Plug Configuration Plug type Line voltageSave Original Packing Materials Moisture CondensationImportant Precautions Avoid Volatile Liquid LCD PanelCopyrights DisposalContents Checking the package contents Names of each part on the main unitRear Models equipped with PC card slotDamage may result Loading dry-cell batteries into the remote control Remove the battery coverReplace the battery cover Insert the dry-cell batteriesPlacement Preparing and using the remote controlSwitching operation modes Placement StylesHow to use the PC card slot ConnectionInstalling the applications Turning the power on and offBasic operations Using handy features Basic operationsUsing handy features Enlarging the picture size ResizeCutting off the picture and sound temporarily Mute Using the wireless LAN PC card Communication modeDisplaying Information Status display FunctionsProjector settings Installing the applicationsComputer settings PreparationDisplaying a computer’s screen via the projector Click on the Remote Control Button Operating the projectorClick on the File icon Click on the Browse button, and select the file to sendMemory PC cards Jpeg files Projecting images stored in a memory PC cardUsing the document camera Set up document to be photographedPreparation of the document camera Image projection with the document cameraUsing the document camera Using the overlay functionLocking the white balance Press the W.BALANCE button. The Lock indicator lights. Lit Correcting illuminated defectsPreparing the computer and projector Operating the computerMount a memory PC card into the PC card slot p.23 Display the camera image, and press the StoreImage button Press the buttons to save the imageUsing the menus Connecting a computerHow to use the menus Operating a computerUsing the menus Image adjustment menusDefault setting menu Display setting menuAir filter cleaning Lens and main unit cleaning Lamp replacementHow to use the supplied software How to use the Projector Configuration ToolHow to use the supplied software How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Launching the Jpeg Conversion ToolNo power Power went out during use, or power won’t come onTrouble indications Making a presentation with converted Jpeg filesBefore calling service personnel Specifications List of general specificationsList of supported signals RGB signals SpecificationSpecifications
Top Page Image Contents