Toshiba T621, T721 How to use the supplied software, How to use the Projector Configuration Tool

Page 31

How to use the supplied software

Please read this chapter if the model you purchased includes a PC card slot.

This chapter briefly describes how to use supplied software applications other than the Wireless utility.

■How to use the Projector Configuration Tool

The Projector Configuration Tool is a software utility that allows you to set up the projector for Infrastructure mode communications using a wireless LAN PC card. When using this application for the first time, conduct Preparation p.34 , and start with the computer in Ad hoc transmission mode.

1Check MAC address.

The MAC address is a unique address assigned to the wireless LAN PC card. Display the MAC address on the screen, referring to “Displaying Information” p.32 . Note down the address for future use.

2Launch the Projector Configuration Tool.

Upon launch, the window shown in the figure to the right appears on the computer screen.

3Click on the Browse button.

The computer starts searching for projectors. When it finds one, “Please select” is displayed in the Projector Selection field.

4Select a projector.

Click on the button for the Projector Selection field, then from the pull-down list that is displayed, select

the project with the MAC address you noted down in step 1 .

When a projector is selected, the computer obtains information from that projector, and displays the results in the boxes of the window.

Here, the following is possible:

From the File menu, select Save As..., and save the pre-modification settings on the computer.

From the File menu, select Open, and apply an existing settings file to the projector.

5Configure the projector.

[Channel]

A channel can be changed by your choice. However, it will be changed automatically to the other channel when the network group having the same SSID exists already in the possible communication area.

[Encryption]

Click on the button to select [Off], [64 bit], or [128 bit].

[Key]

This accepts input if Encryption is set to other than Off (input is required). Input a value from the keyboard.

[Communication mode]

Select Infrastructure by clicking the button.

[SSID]

This is an ID code for connecting to specific individuals over a wireless LAN. This field accepts input when set to Infrastructure Transmission Mode. Set the SSID to the same value as the access point. In factory shipment, this is set to DPJ.

[Projector name]

It is recommended this is set to prevent wrong transmission.

[DHCP]

Specify by clicking the button. If this is set to Used, the IP Address, Subnet Mask, and Gateway below are set automatically.

Consult with a network administrator for the settings below, if DHCP is not used.

[IP Address]

An IP (Internet Protocol) is a data communication protocol. The delivery destination is an IP address.

[Subnet Mask]

This value is to set a limit on the range of IP addresses, and set up a number of sub- networks.

[Gateway]

This is a relay point for connecting different types of network.

6Press the Settings button.

Communication begins, and the computer configures the projector. When setup is finished, a message appears in the window telling you than setup is complete.

From the File menu, select Save As..., and save the settings file on the computer.

Others

60

61

Page 30 Page 32
Image 31
Page 30 Page 32
Contents TLP-T720 TLP-T721 TLP-T620 TLP-T621 TLP-T520 TLP-T521 USA only Power SourcesSource of Light VentilationImportant Safety Instructions Safety Check Damage Requiring ServiceReplacement Parts When using a wireless LAN PC card ModelsMoisture Condensation Place and Manner of InstallationPlug Configuration Plug type Line voltage Save Original Packing MaterialsDisposal Important Precautions Avoid Volatile LiquidLCD Panel CopyrightsContents Names of each part on the main unit Checking the package contentsModels equipped with PC card slot RearDamage may result Insert the dry-cell batteries Loading dry-cell batteries into the remote controlRemove the battery cover Replace the battery coverPlacement Styles PlacementPreparing and using the remote control Switching operation modesConnection How to use the PC card slotTurning the power on and off Installing the applicationsBasic operations Basic operations Using handy featuresEnlarging the picture size Resize Using handy featuresCutting off the picture and sound temporarily Mute Functions Using the wireless LAN PC cardCommunication mode Displaying Information Status displayPreparation Projector settingsInstalling the applications Computer settingsDisplaying a computer’s screen via the projector Click on the Browse button, and select the file to send Click on the Remote Control ButtonOperating the projector Click on the File iconMemory PC cards Projecting images stored in a memory PC card Jpeg filesImage projection with the document camera Using the document cameraSet up document to be photographed Preparation of the document cameraUsing the overlay function Using the document cameraLocking the white balance Operating the computer Press the W.BALANCE button. The Lock indicator lights. LitCorrecting illuminated defects Preparing the computer and projectorPress the buttons to save the image Mount a memory PC card into the PC card slot p.23Display the camera image, and press the Store Image buttonOperating a computer Using the menusConnecting a computer How to use the menusDisplay setting menu Using the menusImage adjustment menus Default setting menuAir filter cleaning Lamp replacement Lens and main unit cleaningHow to use the Projector Configuration Tool How to use the supplied softwareLaunching the Jpeg Conversion Tool How to use the supplied softwareHow to use the Jpeg Conversion Tool Converting files created with Microsoft PowerPointMaking a presentation with converted Jpeg files No powerPower went out during use, or power won’t come on Trouble indicationsBefore calling service personnel Specification SpecificationsList of general specifications List of supported signals RGB signalsSpecifications
Top Page Image Contents