Toshiba S221, T721 Trouble indications, Making a presentation with converted Jpeg files, No power

How to use the supplied software (Continued)

Making a presentation with converted JPEG files

1)Copy the folder created by the JPEG Conversion Tool, or its contents, onto a memory PC card.

2)Use the steps 1 , 2 in “Projecting images stored in a memory PC card” p.42 to display a list of thumbnails.

3)Follow the instructions in step 3 to find slide001.jpg (the first slide), and move the orange frame over it (select slide001.jpg).

4)Set the remote control to [PJ Mode], and press the button. An enlarged view of the first slide appears on the screen. This starts the presentation.

5)To continue to the next slide, click on the remote control’s button. To go back to the previous slide, click on the button.

●Creating a screen capture and converting it into a JPEG file

Trouble indications

The indicator lights inform you of internal abnormalities.

FAN	TEMP	LAMP	ON	No power
			(Off)	⇒ Problem with projector
		or	(Red lit)	• Unplug the power cord, and contact your dealer.
FAN	TEMP	LAMP	ON	Lamp went out during use, or won’t come on
		(Red lit)	(Red lit)	⇒ Returns to standby after about 2 minutes. If the projector fails to
				operate normally after turning the power back on, either the lamp
				needs replacing, or there is a problem with the projector.

•If a lamp burns out, replace it with a new one.

•Unplug the power cord, and contact your dealer.

FAN TEMP LAMP	ON	Power went out during use, or power won’t come on
(Green lit) (Red lit)	(Red lit)	⇒ Internal overheating, or the outside temperature is too high.

This function saves the current computer screen as a JPEG file.

(1)In the Conversion Method field, select Creating screen capture.

(2)In the File settings field, click on the Browse button for File name after conversion.

The Save As dialog box appears.

(3)In the Save As dialog box:

(a)Specify the location in which to save the converted file;

(b)Enter a file name of up to 8 characters in the File Name field; and

(c)Click on the Save button.

(4)(a) In the JPEG Conversion Tool window, click on

the Conversion button.

(b)A confirmation message appears. Click Yes. The computer creates a screen capture, and converts it into a JPEG file in the specified location. When it is finished, a message appears to tell you that a JPEG file has been created.

(1)

(2)

(4)-(a)

(3)-(a)

(3)-(b) (3)-(c)

(4)-(b)

	•	Place the projector so that the air intake and exhaust are not
Or	Or	blocked.
(Off)	(Orange lit)
		Unplug the power cord and wait for a short while, then turn the
	•
	Or	power back on.
	(Green lit)
		Clean the air filter. p.57
	•

❈The icon will appear before the power goes out.

❈After displaying the abnormal state for about 2 minutes, returns to standby.

FAN TEMP LAMP	ON	Power went out during use, or power won’t come on
(Red lit or flashing)	(Red lit)	⇒ Problem with internal cooling fan.

•Unplug the power cord, and contact your dealer.

Or	❈ The	icon will appear before the power goes out.
(Orange lit or flashing)
	❈ After displaying the abnormal state for about 2 minutes, returns
	to standby.

FAN TEMP LAMP	ON	Power went out during use, or power won’t come on
(Orange	(Red lit)	⇒ The lamp cover is not properly attached.
flashing)		• Unplug the power cord, and reattach the lamp cover. p.59

❈ The	icon will appear before the power goes out.
❈ After displaying the abnormal state for about 2 minutes, returns
to standby.

Note

•The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024 x 768 pixels.

PRECAUTIONS

•Make sure to unplug the power cord if something goes wrong.

•If the power cord is unplugged before cooling is complete, give the lamp time to cool before plugging it back in. If the lamp overheats it may fail to light. Unplugging the power cord repeatedly when the temperature is high will shorten the life of the lamp. (Even if you are not concerned about lamp lifetime, the light may not come on if you do not wait at least 3 minutes.)

Others

64 65