Toshiba TLP471U, TDP-ET20, TLP671U, TLP651U, TLP651A Connecting video equipment, Output terminals

Connections and installation

(Continued)

Connecting video equipment

Check that the power for the projector and computer is off before connecting the cables.

CONTENTS 17

Output terminals

Check that the power for the projector and computer is off before connecting the cables.

(not supplied)

Audio cable (not supplied)

To audio output R (red)

To audio output L (white)

To CR(PR) output To CB(PB) output To Y output

RS-232CRGB

CONTROLMONITOR

VIDEO INPUT

RGB	AUDIO
	RGB INPUT
-VIDEO VIDEO	L - AUDIO -R

To RGB INPUT (RGB)

To RGB INPUT (AUDIO)

You can connect an

extra monitor to view

the picture.

Video player with color difference output

RS-232C	RGB	AUDIO	RGB	AUDIO
CONTROL	MONITOR OUTPUT			RGB INPUT
		VIDEO INPUT		To VIDEO INPUT (VIDEO) (yellow)
		S-VIDEO VIDEO		L - AUDIO -R
To VIDEO				To VIDEO INPUT (AUDIO L) (white)
				To VIDEO INPUT (AUDIO R) (red)
INPUT
(S-VIDEO)				Audio/Video cable (supplied)

	To Video output (yellow)
S-VIDEO cable (not supplied)	To Audio output (white)
	To Audio output (red)
To S-VIDEO output

Video tape player

Note

Signal input to the S-VIDEO jack takes priority over that to the VIDEO jack.

You can connect a computer	To MONITOR OUTPUT (AUDIO)
to control the projector. 49	Ø3.5mm STEREO mini plug
Audio cable	(Audio output level is constant.)
(not supplied)

To audio input

Connect a stereo system for dynamic sound.

Notes

•Sound of the source which you select is output to the connected stereo system, etc.

•The MONITOR OUTPUT (RGB output) connector always sends out a signal which is input to the RGB INPUT (RGB input) connector regardless of your source selection.

•Even while the projector is in standby mode, the MONITOR OUTPUT (RGB output) connector continues its output.