Others
(Continued)
CONTENTS | 46 |
|
|
|
| : full compatible |
| : dot resizing display |
| ||
|
|
|
| : simplified display | : high resolution serial transfer control | ||||
| Signal | Frequency | Resolution (line) | Synchronizing | Default |
| |||
Mode | System | Horizontal | Vertical | Horizontal | Vertical |
| H/V | 650/651 450/451 | Remarks |
(kHz) | (Hz) |
| 670/671 470/471 |
| |||||
|
|
|
|
|
| model model |
| ||
XGA60 | XGA 60Hz | 48.363 | 60.004 | 1024 | 768 |
| N/N |
| RGB IN |
XGA70 | XGA 70Hz | 56.476 | 70.069 | 1024 | 768 |
| N/N |
| RGB IN |
XGA75 | XGA 75Hz | 60.023 | 75.029 | 1024 | 768 |
| P/P |
| RGB IN |
XGA85 | XGA 85Hz | 68.677 | 84.997 | 1024 | 768 |
| N/N |
| RGB IN |
MAC19 | 60.197 | 74.872 | 1024 | 768 |
| N/N |
| RGB IN | |
SXGA 75Hz | 67.500 | 75.000 | 1152 | 864 |
| P/P |
| RGB IN | |
MAC21 | 68.681 | 75.062 | 1152 | 870 |
|
| RGB IN | ||
SXGA 60Hz | 60.000 | 60.000 | 1280 | 960 |
| P/P |
| RGB IN | |
SXGA 85Hz | 85.938 | 85.002 | 1280 | 960 |
| P/P |
| RGB IN | |
SXGA43i | SXGA 43Hz interlace | 46.433 | 43.436x2 | 1280 | 1024 |
| P/P |
| RGB IN |
SXGA 60Hz | 63.981 | 60.020 | 1280 | 1024 |
| P/P |
| RGB IN | |
SXGA 75Hz | 79.976 | 75.025 | 1280 | 1024 |
| P/P |
| RGB IN | |
SXGA 85Hz | 91.146 | 85.024 | 1280 | 1024 |
| P/P |
| RGB IN | |
UXGA60 | UXGA 60Hz | 75.000 | 60.000 | 1600 | 1200 |
| P/P |
| RGB IN |
UXGA65 | UXGA 65Hz | 81.130 | 65.000 | 1600 | 1200 |
| P/P |
| RGB IN |
UXGA70 | UXGA 70Hz | 87.500 | 70.000 | 1600 | 1200 |
| P/P |
| RGB IN |
UXGA75 | UXGA 75Hz | 93.750 | 75.000 | 1600 | 1200 |
| P/P |
| RGB IN |
Notes
•If the mode identification does not define the mode described on the chart above, adjust to the projection details.
•If the mode identification is carried out correctly, a normal display may be not obtained depending on the signal frequency.
•SXGA, UXGA signals can be projected since the projector has simplified compatibility with them. (However, letters and lines can be inequal or a part can be missing. Some signals may not be projected at all.)
•Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing, and resolutions.
(Continued)