Toshiba TDP-EX20 owner manual Operating a computer using the remote control, Placement

Page 12

Operating a computer using the remote control

A computer can be operated using the projector’s remote control. This function is available on any computer with the Windows® 98/98SE, Windows® Me, Windows® 2000, Windows® XP, or Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse remote control receiver is also supported on OS 9 or OS X for the Macintosh). However, please note that Toshiba does not guarantee the operation of all computers.

1Connecting a computer

Connect the mouse remote control receiver (supplied) to a computer.

Placement

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles.

The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the Default setting 2 menu p.44 , in accordance with your needs.

Floor-mounted front projection

To USB port

Mouse remote control receiver

The remote control may fail to operate if the mouse remote control receiver is exposed to bright sunlight or fluorescent lighting.

In such a case, change position or direction of the mouse remote control receiver and retry.

Ceiling-mounted front projection

 

Ceiling-mounted rear projection

Preparations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Operating a computer

Operate remote control’s buttons towards the mouse remote control receiver.

Moving the mouse pointer

Press the mouse control button in the direction you wish the mouse pointer to move, then press.

To left click

Press the L-CLICK button.

To right click

Press the R-CLICK button.

To drag and drop

Holding down the L-CLICK button, move the mouse control button until the mouse pointer is over the desired location, then release the L-CLICK button.

Using the computer’s page up [] and down [] function

Press the PAGE+ and PAGE- buttons to switch PowerPoint® slides.

WARNING

•Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit. Attempting to clean and replace the lamp in a high location by yourself may cause you to fall, resulting in injury.

•If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident.

•If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let everyone involved with the use of the projector know that fact.

Projection Distance and Size

Use the figures, tables, and formulas below to determine the projection size and projection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.)

Remote Control Front Remote Control Rear

 

R-CLICK

Mouse control

L-CLICK

PAGE –

PAGE +

Screen

As seen from above

90°

As seen from the side

Lens center

90°

a

a is the distance (mm, feet) between the lens and the screen, and corresponds to a range of 580 mm (1.90 ft.) to 1501 mm (4.93 ft.). H is the height from the image bottom to the center of the lens.

a = 0.00375 × projection size (iinches)2 + 14.815 × projection size (inches) – 18.3

Projection size

Projection

Height (H)

distance a

 

 

40 inches

580 mm (1.90 ft.)

91.4 mm (0.30 ft.)

50 inches

732 mm (2.40 ft.)

114.3 mm (0.38 ft.)

60 inches

884 mm (2.90 ft.)

137.2 mm (0.45 ft.)

80 inches

1191 mm (3.91 ft.)

182.9 mm (0.60 ft.)

100 inches

1501 mm (4.93 ft.)

228.6 mm (0.75 ft.)

22

23

Page 11 Page 13
Image 12
Page 11 Page 13
Contents
TDP-EX20 Safety Precautions Power-Cord Protection Power SourcesCleaning Source of LightImportant Safety Instructions Safety Check Replacement PartsDo not use the product in a closed installation state ServicingImportant Precautions Avoid Volatile Liquid Place and Manner of InstallationMoisture Condensation Copyrights DisposalTrademarks Notational Conventions Used in This ManualContents Checking the package contents Names of each part on the main unitNames of each part on the control panel and remote control Remote ControlLabel location Operating the remote control Remove the battery cover Insert the dry-cell batteriesReplace the battery cover Dry-cell batteriesOperating a computer using the remote control PlacementConnection Before connectionTurning the power on and off Basic operations Using handy features Using auto setting Only for input from computerPress the remote control’s Auto SET button Basic operationsUsing handy features Zooming out the imagesResizing image Changing picture mode Setting the password How to change passwordCutting off the picture and sound temporarily Mute Changing screen sizeUsing the menus How to set password from Off to OnSetup using the Setting display How to operate when password is OnUsing the menus Image adjustment menuPosition adjustment menu Display setting menu Default setting menu Detailed description Fan mode Remote control code setting for remote controlLamp power Displaying Information Status displayBefore connecting via network Connection using the Network Projector Windows VistaCommunication mode FunctionsHow to use the USB terminal Setting up the Network Projector/Network Utility Projector settings Be sure to read this subsectionCharacter entry Details on individual itemsSecurity for wireless LAN settings Network authentication Network key When you have set Encryption to WEPWhen you have set Encryption to TKIP/AES Setting initializationComputer settings Control setting menuDetailed description Projector nameSetting slideshow options PrecautionsDetails on individual items Still Image Movie ImageUsing the Network Projector Setting up the projectorSetting up the computer Checking the projector statusInstalling the applications How to installHow to uninstall System RequirementsUsing the Network Utility Using the Network Utility Click on the Jpeg File iconClick on the Browse button, and select the file to send Click on the iconClick on the Browse button and select the file to send Select the projector to transmit toPlay the video file via the Control window Easy Connect utility Profile settings Advanced settingUnplug the USB memory WEB browserProjecting images stored in a USB memory Projecting images stored in a USB memory How to use the Jpeg Conversion Tool Converting files created with Microsoft PowerPointLaunching the Jpeg Conversion Tool Converting an image fileHow to use the Jpeg Conversion Tool Creating a screen capture and converting it into a Jpeg fileMaking a presentation with converted Jpeg files Setting up the projector using a Web browser How to use the Projector Configuration ToolSettings Select items from the menu on the leftSetting up the projector using a Web browser When the lamp is brokenDetails on major items Settings About lampLamp replacement Lens and main unit cleaning Lamp replacementLens cleaning Main unit cleaningBefore calling service personnel Trouble indicationsBefore calling service personnel SpecificationsList of general specifications Separately sold productList of supported signals RGB signals List of supported signals Y/PB/PR signalsList of supported signals Video, S-Video signals SpecificationsMain Commands Control terminalPin assignment Interface format
Related manuals
Manual 5 pages 20.38 Kb