Toshiba TDP-EX20 owner manual Setting up the projector using a Web browser, Settings

Page 42

Setting up the projector using a Web browser

N How to use the “Projector Configuration Tool”

The “Projector Configuration Tool” uses the Web server features of the projector to set up the projector using the network.

When using the “Projector Configuration Tool”, set up the Network connecting the projector and the computer.

1See “Checking the projector status” p.61 to display information on the screen and write down the IP address.

2Invoke Internet Explorer.

Internet Explorer Ver. 6.0 or Ver. 7.0* is recommended. Enable the Javascript functions. * Toshiba does not guarantee the operation for later versions.

3In the address bar, enter the IP address “http://xxx.xxx.xxx. xxx/” recorded in step 1 above.

The Web browser will then display the following page.

Menu

Projector name

Projector ID

Note: If you use a proxy server, do not enable the proxy when accessing the above IP address.

When the wireless LAN is set to use Ad hoc mode, use the WEB browser function in the Easy Connect menu of Network Utility.

Note

This function can be enabled using the WEB Browser function in the Easy Connect menu of Network Utility without specifying the URL into the browser’s address bar.

4Select items from the menu on the left.

Settings:

Make settings for the Network or USB memory input menu.

Status Display:

Verify the projector state.

Features:

Shows the functions available with the Network or USB

 

memory.

Top:

Returns you to the top page.

TOSHIBA Projector Site: The browser will display the home page at http://multimedia. projector-toshiba.com/map.html, providing projector information. The home page address is subject to change without notice.

(The Toshiba’s web site can be browsed only when your computer can access the Internet.)

Operations

82

83

Image 42
Contents TDP-EX20 Safety Precautions Cleaning Power-Cord ProtectionPower Sources Source of LightImportant Safety Instructions Do not use the product in a closed installation state Safety CheckReplacement Parts ServicingImportant Precautions Avoid Volatile Liquid Place and Manner of InstallationMoisture Condensation Trademarks CopyrightsDisposal Notational Conventions Used in This ManualContents Checking the package contents Names of each part on the main unitNames of each part on the control panel and remote control Remote ControlLabel location Replace the battery cover Operating the remote controlRemove the battery cover Insert the dry-cell batteries Dry-cell batteriesOperating a computer using the remote control PlacementConnection Before connectionTurning the power on and off Basic operations Press the remote control’s Auto SET button Using handy featuresUsing auto setting Only for input from computer Basic operationsUsing handy features Zooming out the imagesResizing image Cutting off the picture and sound temporarily Mute Changing picture modeSetting the password How to change password Changing screen sizeSetup using the Setting display Using the menusHow to set password from Off to On How to operate when password is OnUsing the menus Image adjustment menuPosition adjustment menu Display setting menu Default setting menu Lamp power Detailed description Fan modeRemote control code setting for remote control Displaying Information Status displayCommunication mode Before connecting via networkConnection using the Network Projector Windows Vista FunctionsHow to use the USB terminal Setting up the Network Projector/Network Utility Projector settings Be sure to read this subsectionCharacter entry Details on individual itemsWhen you have set Encryption to TKIP/AES Security for wireless LAN settings Network authenticationNetwork key When you have set Encryption to WEP Setting initializationDetailed description Computer settingsControl setting menu Projector nameDetails on individual items Still Image Setting slideshow optionsPrecautions Movie ImageSetting up the computer Using the Network ProjectorSetting up the projector Checking the projector statusHow to uninstall Installing the applicationsHow to install System RequirementsUsing the Network Utility Click on the Browse button, and select the file to send Using the Network UtilityClick on the Jpeg File icon Click on the iconClick on the Browse button and select the file to send Select the projector to transmit toPlay the video file via the Control window Easy Connect utility Unplug the USB memory Profile settingsAdvanced setting WEB browserProjecting images stored in a USB memory Projecting images stored in a USB memory Launching the Jpeg Conversion Tool How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Converting an image fileHow to use the Jpeg Conversion Tool Creating a screen capture and converting it into a Jpeg fileMaking a presentation with converted Jpeg files Settings Setting up the projector using a Web browserHow to use the Projector Configuration Tool Select items from the menu on the leftDetails on major items Settings Setting up the projector using a Web browserWhen the lamp is broken About lampLamp replacement Lens cleaning Lens and main unit cleaningLamp replacement Main unit cleaningBefore calling service personnel Trouble indicationsList of general specifications Before calling service personnelSpecifications Separately sold productList of supported signals Video, S-Video signals List of supported signals RGB signalsList of supported signals Y/PB/PR signals SpecificationsPin assignment Main CommandsControl terminal Interface format
Related manuals
Manual 5 pages 20.38 Kb