Toshiba TDP-EX20 Computer settings, Control setting menu, Detailed description, Projector name

Using the menus 2 (Continued)

Note

•If you select [Network Projector] in the Setting display (2) menu, the same items in [Network Utility] will be displayed except for the following 2 items.

1[Easy Connect (USB memory)] feature is not available.

2In the item [Application], [Password] and [Disconnect] are available as follows.

Category	Item		Description
Application	Password	Set password	On	Off

Disconnect Disconnect while transferring an image using Network Projector.

[Yes No] [Enter: ]

See “Setting the Network Projector/Network Utility” p.51 to conduct adjustments and settings for Network Projector.

N Computer settings

Refer to instruction manuals of your computer or wireless LAN adapter to perform the following settings.

•Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).

•Set SSID (for some types of wireless LAN adapter, use Network name instead) as the same as projector’s SSID (at factory shipment, this is set to TDPJ).

•If Encryption, Network authentication, Key index and Network key are set on the projector, set to the same values.

Note

•The Easy Connect utility p.70 allows users to easily connect the projector to a computer over wireless networks, without making wireless LAN settings. For Easy Connect support, the computer requires a wireless LAN environment that is NDIS5.1 or higher driver compliant.

Refer to the user’s manual supplied with the wireless LAN adapter or the wireless LAN embedded computer for more information.

N The control setting menu

This menu sets Projector name, Email function and PJLink function, etc. Select Control setting in step 2 in “Projector settings” p.50 . The following content will be displayed.

Item						Description
Projector	Specify a desired character string (0 to 16 characters).
name	[	or	: Enter setting.]		[	: Select item.]		[	: Move left or right one
	character.] [			to	: Set a character.]
		Confirm: [OK			Cancel]	[Enter:	]
Email		[	: E-mail setting]		[	: Select item]
		Status notification: On				Off
		SMTP server: Enter a character string using numeric keys of the remote
		control.
		Port number: Enter a character string using numeric keys of the remote
		control.
		Destination address: Enter a character string using numeric keys of the
		remote control.
		Confirm:		[OK	Cancel]
PJLink		[	: PJLink setting]		[	: Select item]
		PJLink authentication: On				Off
		Password: Enter a character string (1 to 32 characters) using numeric keys of
				the remote control.
		Confirm: [OK			Cancel]
Wireless	[	or	: Enter setting.]		[	: Select item.]		[Enabled		Disabled]
network		Confirm: [OK			Cancel]	[Enter:	]

L Detailed description

•[Projector name]

This can be used to identify projectors when communicating with multiple projectors, or if there is a possibility that another person who is out of communication range will be using the same projector. It is recommended this is set to prevent wrong transmission.

•[Email]

<Status notification>: Sends alarm information to the specified E-mail address when an error such as lamp blowout occurs.

<SMTP server>: Set an IP address of the SMTP server.

<Port number>: Enter a port number of the SMTP server.

<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)

•[PJLink]

<PJLink authentication>: Set whether or not to authenticate the user by password when the projector is accessed via the PJLink-compliant Software Application. (Set [On] or [Off].)

<Password>: Enter a password for confirmation when the above <PJLink authentication> is set to [On].

Operations

56 57