Toshiba TDP-EX20 owner manual Using the menus, How to set password from Off to On

Page 19

Using handy features (Continued)

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press the or button.

2Select [Password setting] in the password registration, setting menu, and press the or button.

3Select [On].

4 Select [OK] and press the button.

The password entry screen is displayed.

Using the menus 1

You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.18 on the control panel (main unit side) and remote control.

N Setup using the Setting display

The menu shown below is for operation instructions purposes and might differ from the actual display.

1.Press the MENU button Display the Setting display menu.

2.Select a Category

5Enter the password using numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3 Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector

goes into normal operation. If the password is wrong, a message appears to prompt

Select a category by using . There are following 6 categories:

Image adjustment menu p.38

Position adjustment menu p.39

Display setting menu

p.40

Default setting 1 menu

p.43

Default setting 2 menu

p.44

Status display menu

p.45

Displays the current adjustments and settings of selected category.

Item shown with gray cannot be adjusted with the current input source.

you to re-enter the password, and again the password entry screen is displayed. If

you enter a wrong password for more than 5 times, the projector will automatically

3.Adjustments & Settings Press or to open the menu.

power off and enter standby mode.

Note

•When the password setting is [On], the password will be enabled only when the power is turned on for the first time after the main power switch has been on. The password function will not be activated if the power backed on while it is standby mode without turning off the main power switch.

How to set password (from [On] to [Off])

1Select [Password] in the Default setting 2 menu and press the or button.

The password entry screen is displayed.

Item

Adjustment/Setting Value

These marks signify the items can be adjusted/set by using

.

These marks signify the items can be selected from the list by using .

These marks signify that there are options.

Press or

to display a list of options.

These marks signify that there are setting

screens. Press or to display a list of

setting screens.

*When no item is

changed, press .

Operations

3Select [Password setting] in the password registration, setting menu, and press the or button.

After an item is selected, apply it by

pressing .

Toggle items with

.

 

Select items with

and press

.

Fix selection with

.

 

4Select [OFF].

5Select [OK] and press the button.

•The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.

•To return to previous item, press the RETURN button.

•When Network or USB memory input is selected, pressing the MENU button displays the Setting display (2) menu.

4. End Press the MENU button once more.

(The menu will disappear automatically after 30 seconds, if no operation is conducted.)

36

37

Page 18 Page 20
Image 19
Page 18 Page 20
Contents TDP-EX20 Safety Precautions Source of Light Power-Cord ProtectionPower Sources CleaningImportant Safety Instructions Servicing Safety CheckReplacement Parts Do not use the product in a closed installation statePlace and Manner of Installation Important Precautions Avoid Volatile LiquidMoisture Condensation Notational Conventions Used in This Manual CopyrightsDisposal TrademarksContents Names of each part on the main unit Checking the package contentsRemote Control Names of each part on the control panel and remote controlLabel location Dry-cell batteries Operating the remote controlRemove the battery cover Insert the dry-cell batteries Replace the battery coverPlacement Operating a computer using the remote controlBefore connection ConnectionTurning the power on and off Basic operations Basic operations Using handy featuresUsing auto setting Only for input from computer Press the remote control’s Auto SET buttonZooming out the images Using handy featuresResizing image Changing screen size Changing picture modeSetting the password How to change password Cutting off the picture and sound temporarily MuteHow to operate when password is On Using the menusHow to set password from Off to On Setup using the Setting displayImage adjustment menu Using the menusPosition adjustment menu Display setting menu Default setting menu Displaying Information Status display Detailed description Fan modeRemote control code setting for remote control Lamp powerFunctions Before connecting via networkConnection using the Network Projector Windows Vista Communication modeHow to use the USB terminal Projector settings Be sure to read this subsection Setting up the Network Projector/Network UtilityDetails on individual items Character entrySetting initialization Security for wireless LAN settings Network authenticationNetwork key When you have set Encryption to WEP When you have set Encryption to TKIP/AESProjector name Computer settingsControl setting menu Detailed descriptionMovie Image Setting slideshow optionsPrecautions Details on individual items Still ImageChecking the projector status Using the Network ProjectorSetting up the projector Setting up the computerSystem Requirements Installing the applicationsHow to install How to uninstallUsing the Network Utility Click on the icon Using the Network UtilityClick on the Jpeg File icon Click on the Browse button, and select the file to sendSelect the projector to transmit to Click on the Browse button and select the file to sendPlay the video file via the Control window Easy Connect utility WEB browser Profile settingsAdvanced setting Unplug the USB memoryProjecting images stored in a USB memory Projecting images stored in a USB memory Converting an image file How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Launching the Jpeg Conversion ToolCreating a screen capture and converting it into a Jpeg file How to use the Jpeg Conversion ToolMaking a presentation with converted Jpeg files Select items from the menu on the left Setting up the projector using a Web browserHow to use the Projector Configuration Tool SettingsAbout lamp Setting up the projector using a Web browserWhen the lamp is broken Details on major items SettingsLamp replacement Main unit cleaning Lens and main unit cleaningLamp replacement Lens cleaningTrouble indications Before calling service personnelSeparately sold product Before calling service personnelSpecifications List of general specificationsSpecifications List of supported signals RGB signalsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsInterface format Main CommandsControl terminal Pin assignment
Related manuals
Manual 5 pages 20.38 Kb
Top Page Image Contents