Toshiba TDP-EX20 owner manual Basic operations

Page 15

Basic operations

1Turn on the power.

Turn on the power by following the instructions in “Turning the power on” p.26 .

2Select the language and the lamp power (When using the first time).

When the projector is used for the first time after purchase, the start menu for language (to display the menus and messages on the screen) and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to

the step 6 .)

1Use the , , or button to select the desired language and press the button.

Notes

•When [Auto input search] is set to [Off] in the Default setting 1 menu p.43 (factory setting is [On]), the Input select menu appears if you press the INPUT button p.43 .

•If no signal is being output from the connected equipment, pressing the INPUT button does not change the input and “There is no other input signal.” will appear.

5Projector placement angle adjustments

The placement angle and the height of the projected image can be adjusted by the foot adjuster.

1 Lift up the front of the projector to the desired angle, then press the foot

English

French

German

Italian

Spanish

Portuguese

Russian

Swedish

Turkish

Polish

Norwegian

Finnish

Czech

Hungarian

Greek

Danish

Dutch

Rumanian

Japanese

Chinese (simplified)

Chinese (traditional)

Korean

Indonesian

adjuster release button.

The foot adjuster extends. Release the button to lock the position.

2 To fine adjust the angle, twist the foot adjuster.

3 To adjust the horizontal angle, use the right and left tilt adjusters.

Message for setup confirmation is displayed in a selected language.

Then, the menu for lamp power selection and configuration is displayed. It is automatically set as Standard. To change the setting, follow the step 2 .

2Use the or button to select the lamp power and press the button.

The lamp power, if selected, will be toggled without pressing the button. The display automatically disappears in a few seconds.

Notes

•When the projector is turned on the next time, the start menu does not appear upon startup. However, if [Reset all] is executed from the Default setting 2 menu p.44 , the start menu will be displayed the next time when the power is turned on.

•The language can also be set via the Display setting menu p.40 and Lamp power via the Default setting 2 menu p.44 .

•This owner’s manual assumes that English has been selected.

3Activate the connected device.

Turn on and start the connected device such as a computer.

4Press the INPUT button.

An image of the connected equipment is projected.

Each time you press the INPUT button, it switches to the input of the connected equipment that is outputting video signals.

•To stow the foot adjuster, hold up the projector while pressing the foot adjuster release button, then slowly lower the projector.

Note

•When [Auto keystone] is set to [On] in the Default setting 1 menu, the keystone distortion will automatically be corrected based on the projector placement angle. If you do not desire the automatic keystone correction, set [Auto keystone] to [Off].

6Adjusting the screen size and focus

1 If you wish to make the screen size

Control panel

Focusing lever

smaller, use the ZOOM button to

 

 

adjust the screen size.

 

 

2 Use the focusing lever to adjust the focus.

7 Adjusting the volume with the buttons

The speaker volume can be adjusted when an audio signal is being input.

Operations

28

29

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TDP-EX20 Safety Precautions Source of Light Power-Cord ProtectionPower Sources CleaningImportant Safety Instructions Servicing Safety CheckReplacement Parts Do not use the product in a closed installation stateImportant Precautions Avoid Volatile Liquid Place and Manner of InstallationMoisture Condensation Notational Conventions Used in This Manual CopyrightsDisposal TrademarksContents Names of each part on the main unit Checking the package contentsNames of each part on the control panel and remote control Remote ControlLabel location Dry-cell batteries Operating the remote controlRemove the battery cover Insert the dry-cell batteries Replace the battery coverPlacement Operating a computer using the remote controlBefore connection ConnectionTurning the power on and off Basic operations Basic operations Using handy featuresUsing auto setting Only for input from computer Press the remote control’s Auto SET buttonUsing handy features Zooming out the imagesResizing image Changing screen size Changing picture modeSetting the password How to change password Cutting off the picture and sound temporarily MuteHow to operate when password is On Using the menusHow to set password from Off to On Setup using the Setting displayUsing the menus Image adjustment menuPosition adjustment menu Display setting menu Default setting menu Displaying Information Status display Detailed description Fan modeRemote control code setting for remote control Lamp powerFunctions Before connecting via networkConnection using the Network Projector Windows Vista Communication modeHow to use the USB terminal Projector settings Be sure to read this subsection Setting up the Network Projector/Network UtilityDetails on individual items Character entrySetting initialization Security for wireless LAN settings Network authenticationNetwork key When you have set Encryption to WEP When you have set Encryption to TKIP/AESProjector name Computer settingsControl setting menu Detailed descriptionMovie Image Setting slideshow optionsPrecautions Details on individual items Still ImageChecking the projector status Using the Network ProjectorSetting up the projector Setting up the computerSystem Requirements Installing the applicationsHow to install How to uninstallUsing the Network Utility Click on the icon Using the Network UtilityClick on the Jpeg File icon Click on the Browse button, and select the file to sendClick on the Browse button and select the file to send Select the projector to transmit toPlay the video file via the Control window Easy Connect utility WEB browser Profile settingsAdvanced setting Unplug the USB memoryProjecting images stored in a USB memory Projecting images stored in a USB memory Converting an image file How to use the Jpeg Conversion ToolConverting files created with Microsoft PowerPoint Launching the Jpeg Conversion ToolHow to use the Jpeg Conversion Tool Creating a screen capture and converting it into a Jpeg fileMaking a presentation with converted Jpeg files Select items from the menu on the left Setting up the projector using a Web browserHow to use the Projector Configuration Tool SettingsAbout lamp Setting up the projector using a Web browserWhen the lamp is broken Details on major items SettingsLamp replacement Main unit cleaning Lens and main unit cleaningLamp replacement Lens cleaningTrouble indications Before calling service personnelSeparately sold product Before calling service personnelSpecifications List of general specificationsSpecifications List of supported signals RGB signalsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsInterface format Main CommandsControl terminal Pin assignment
Related manuals
Manual 5 pages 20.38 Kb
Top Page Image Contents