Toshiba TLP-MT7E manual Yes and press Enter, Keystone, Horizontal reference value is reseted

FULL MENU settings – Keystone (continued)

53

	Control panel
Remote control	(Main unit side)

When selecting “Keystone” in step 3.

4-a	Press VOL/ADJ (+/-) to adjust and set.
		(-)	(+)
	Keystone:	To reduce the lower width	To reduce the upper width

When selecting “Horizontal reference value reset” in step 3.

AUTO	AUTO
KEYSTONE	SET

4-b

ENTER

Press ENTER.

The sub-menu of “Horizontal reference value reset” appears.

Y/PB/PR

ON /

STANDBY

INPUT

KEYSTONE AUTO SET

FREEZE MUTE

PIP CALL RESIZE

MENU

VOL/ADJ

VOL/ADJ.

	ENTER	EXIT
4-a	MENU	INPUT

4-a

4-b

5

ENTER

Keystone

Horizontal referrence value reset

Recalibrate the horizontal reference value for keystone.

Are you sure ?

Yes

No

MENU QUICK Select ENTER Enter EXIT Back

Use the selection buttons ( / ) to select

Adjustments

ENTEREXIT

CT-90072

4-b

5

ON/STANDBY

ENTER

“Yes” and press ENTER.

The horizontal reference value is reseted.

Settings

TEMP LAMP ON

BUSY FAN

5

ENTER

EXIT

EXIT

After the adjustments and settings are finished, press EXIT several times until the menu screen disappears.

Press the EXIT button once when the FULL MENU is displayed, press twice when the sub menu is displayed.

&

Notes

•If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory.

•The “Keystone” adjustments and settings are applied to all the input sources. (It is impossible to store different adjustments and settings for each input source.)