Toshiba TLP-MT7E manual Specifications, Replacement lamp

Page 80

80

Specifications

Others

Main unit

Power consumption	265W (Standby: 18W)
Mass	5.3kg
Dimensions	345 x 104 x 281 (mm) (W/H/D)
(Except the protrusion parts)
Cabinet Material	ABS resin
Ambient environment	Temperature : 0° C to 35° C
	Humidity : 30% to 70% RH
Lamp	High pressure mercury lamp
Projection screen size	28 to 250 inches
Projection distance	1.38 to 9.83m
Speaker	2W (monaural)
Connectors
• COMPONENT IN	Mini D-sub 15-pin
	Y/PB/PR/Computer (combination)
• S-VIDEO IN	Mini DIN 4-pin
• VIDEO IN	1V(p-p), 75Ω , RCA pin jack
• AUDIO (L/R)	1V(p-p), more than 22kΩ	, RCA pin jack x 2
• AUDIO IN	1V(p-p), more than 22kΩ	, ø3.5mm stereo
	mini jack
• CONTROL	Mini DIN 8-pin (RS-232C)

Liquid crystal display

Projection system	3-panels transmission
Panel size	1.3 inches
Driving system	TFT active matrix
Picture elements	921,600 pixels (1280 x 720 dots) (H./V.) x 3

Projection lens

Lens	Zooming lens
	F = 2.2 to 2.5, f = 47 to 61mm
Focusing	Manual operation
Zooming	Manual operation

Accessories

Owner’s manual	1
Remote control	1
R6 (AA) size battery	2
Power cord	2
AV cable	1	(3m)
Audio cable (for Component)	1	(3m)
Control cable	1	(1.8m)

Sold separately

Replacement lamp

TLPLX10

•The design and specifications are subject to change without notice.

Trademarks

NEC, PC-98 series are trademarks of NEC Corporation.
VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, Inc.
Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
Display Data Channel is a trademark of Video Electronics Standard Association.	Printed in Japan

Image 80

Contents TLP-MT7E Safety Precautions Moisture Condensation Save Original Packing MaterialsAvoid Volatile Liquid Ventilation Power SourcesSource of Light Important Safety Instructions Heat Cleaning OverloadingPower-Cord Protection Water and MoistureAccessories Object and Liquid EntryDo not place the product vertically Stack InhibitedDamage Requiring Service Replacement PartsSafety Check Servicing220 Power supply cord selectionPlug Configuration Plug type Line voltage Contents Names of each part on the main unit Lamp indicator 25 28 Temp indicator 64 Busy indicator Selection buttonExit button Menu buttonControl connector 24 RS-232C connector Component in connector 21Video connector Audio in jack Audio input 21 23 ø 3.5mm stereo mini-jackNames of each part on the remote control Install the batteries Loading batteriesOpen the cover Attach the coverRemote control operation Floor-mounted projector placement ViewerFloor-mounted projector placement Contents Take off the lens cover Connect the power cordPower cord Supplied Obtained and hold down the foot adjuster release button Turn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Ceiling-mounted rear projectionConnecting video equipment Video equipment DVD player, etcConnecting video equipment Connecting a computer Connection Installationand Projector operation control by a computerPlayback mode Projection on the screenPress ON/STANDBY Turn on the connected equipment and put itSignal sent from the computer Select the input sourcePress the Input button repeatedly to select it Icon of the input source selected appearsAdjust the picture size by turning Focusing ringPress VOL/ADJ +/ to adjust volume Zooming leverPress ON/STANDBY again Turning the power offPress ON/STANDBY after using the projector Remote control Control panel Correcting the keystone distortionPress Auto Keystone Main unit sideRemote control Icon appears in the resize modeEnlarging the picture size Press ResizeIcon Appears in the mute mode Cutting off the picture and sound temporarilyPress Mute Sound and picture are cut off temporarilyAppears in the freeze mode Freezing the picturePress Freeze Picture freezesAdjusting the picture automatically Computer input Input full screen video signals from the inputSource computer and project the image Press Auto SETDisplaying PIP Sub-pictures Press PIPSub-picture is displayed Press the PIP button again to turn off the sub-pictureDisplaying Information Press CallInput Lamp timeAdjustments and settings on the menu screen Quick MenuOperating the menu screen Quick Menu adjustments and settings You can set the basic setting used frequentlyPress Menu Quick Menu appearsSettings Press VOL/ADJ +/ to adjust and set Remote control Main unit sideSub-menu screen of input source setting appears Press EnterPress VOL/ADJ +/- to select the type of input source Press Exit to return to the Quick MenuUse the selection buttons / to select a language Menu screen disappears After the adjustments and settings areFinished, press Exit Use the selection buttons / to select Full Menu adjustments and settings PicturePress Menu twice Signal format Video mode YesFrequency Adjust vertical stripes Adjust vertical stripes Yes Settable No Not displayedScreen size Computer input Screen size Video input, S-Video input, Y/PB/PR inputPress Exit to return to the Full Menu Sub-menu of selected items appears PositionLevelUse the selection buttons / to select setting items Signal format Y/PB/PR inputVideo mode Video input, S-Video input Sub-menu of selected items appearsEnter Full Menu settings Audio Use the selection buttons To select Setting itemsUse the selection button To display Audio menu To move back to itAfter the settings are finished, press Exit When set to Off, no sound is produced from the speakersSpeaker output Channel selectFull Menu settings Keystone Use the selection buttons To display Keystone menuSub-menu of Horizontal reference value reset appears Horizontal reference value is resetedYes and press Enter KeystoneUse the selection buttons To display Display menu Full Menu settings DisplayWhen pressed once, the Quick Menu screen appears. When Sub-menu of Language appears Portuguê s PortugueseStart-up screen No signal background Setting of screen of no signal inputMenu position Full Menu settings Default setting Use the selection buttons To display Default setting menuWhen pressed once, the Quick Menu screen appears. When Pressed twice, the Picture screen of the Full Menu appearsSub-menu of Input source setting appears VideoUse the selection buttons / to select the projection mode Sub-menu of Projection mode appearsRear ceiling Ceiling-mounted front projectionPress VOL/ADJ +/ to set No signal power offPower on Picture menus for the each input to Full Menu settings Factory reset modeFactory default setting Menu screen disappears Menu screen disappears PIP menu settingSetting items, then press VOL/ADJ +/ to set Indicator Trouble indicationsAir filter cleaning Unplug the power cordClean the air filter Take off the air filter coverAir filter Filter frame Air filter cover Assemble the air filterMount the air filter cover Lens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Wait until the lamp gets cold enoughTake off the lamp cover on Bottom panelReset the lamp timer Load a new lampAttach the lamp cover Slide the cover in place and tighten two screwsBefore calling service personal Before calling service personal Mini D-sub 15pin connector Do not connect anythingTiming chart Mode Resolution Clock Pixels KHz MHz LinesMode Fh kHz Fv Hz Fsc MHz 15.73 480i 59.9415.63 480p 31.47 59.94 15.63 25 or 720p 45.00 60.00Pin No Signal Description Method Signal groundItems/Status Selection Adjustment Computer Video/S-Video Command PowerComputer Video/S-Video Command Picture Position Picture mode BrightPicture mode Standard Video mode AutoComputer Video/S-Video Command Audio Speaker output Horizontal reference value resetNo signal background Logo OffComputer Video/S-Video Command Display Default Input source setting SettingProjection mode Standard No signal power off OffComputer Video/S-Video Command Volume Increase Enlargement resetDecrease Input select ToggleSpecifications Replacement lamp