Toshiba TLP-SX3500 user manual Using The Mouse/Keyboard Control Function

Page 22

Remote Control (continued)

Using The Mouse/Keyboard Control Function

CAUTION • Before connecting, read the manuals of the device you will connect. Mistaken use of the mouse/keyboard control could damage your equipment.

Only connect to a PC or an USB Hub connected PC.

Do not unplug the connector cables while the computer is operating.

Using the USB control feature, you can use the remote control as a simplified mouse or keyboard of the computer.

Connect the M1-D port of the projector to the computer via the M1-D cable. Then functions illustrated below will be enabled.

memo The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

memo The function can be used only for the functions illustrated on the right.

memo The projector would be enumerated as a mouse and a keyboard of HID (Human Interface Device) class devices, after connecting cable.

LASER INDICATOR

STANDBY/ON VIDEO RGB

+

+

+

 

LENS SHIFT

FOCUS

ZOOM

Mouse left button

BLANK

ASPECT

LASER

 

PREVIOUS

 

NEXT

Mouse move pointer

 

MOUSE

 

ESC

MENU

 

Keyboard

 

Arrow keys / / /

POSITION

RESET

AUTO

MAGNFY

PinP

VOLUME

 

ON

 

 

 

 

FREEZE

MUTE

Mouse right button

OFF

 

 

 

KEYSTONE SEARCH

 

 

1 2 3

 

Keyboard ESC key

ID CHANGE

 

(Front)

(Rear)

22

Image 22
Contents TLP-SX3500 ProjectorBefore Using Safety PrecautionsSource of Light Power SourcesVentilation Water and Moisture CleaningHeat OverloadingDo not place the product vertically AccessoriesObject and Liquid Entry Stack InhibitedSafety Check Damage Requiring ServiceReplacement Parts ServicingSave Original Packing Materials Place and Manner of InstallationMoisture Condensation Avoid Volatile Liquid Important PrecautionsLCD Panel Copyrights DisposalProjector Features PreparationContents Part Names ProjectorControl Buttons Remote ControlRemote Control Control Panel on the ProjectorSetting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices ComputerProjector If using a M1-D input to mouse controlIf using a BNC input NetworkIf using a Scart RGB input If using a s-video signalIf using a component signal VCR/DVD Player ProjectorSpeakerProjector Connecting The Power SupplyMonitorProjector Audio OUTAbout The Laser Pointer Remote ControlLoading Batteries Operating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Turning On The Power Power ON/OFFTurning Off The Power Selecting An Input Signal OperatingUsing The Automatic Adjustment Feature Selecting The Aspect RatioAdjusting The Picture Position Correcting The Keystone DistortionMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Using The Magnify Feature Freezing The ScreenDisplaying The Child Window Selecting An Audio InputUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Aspect ResetMain Menu WhisperPICTURE-1 Menu PICTURE-1 Menu Position PICTURE-2 MenuSize Color Space Input MenuVideo NR P. Input PowerupInput Menu P. PositPower OFF AdjustAuto Menu Auto Menu SearchScreen Menu MyScreen LockHow to register your picture as the MyScreen Screen MenuIR Remote VolumeOption Menu Lamp TimeOption Menu Network Menu SetupDhcp Network Setting Up Ex. Case of IP Address =Lamp About disposal of a lampCase of replacement by yourself Replacing The LampAir Filter Caring For The Air FilterCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Signal source does not correctly work Phenomena That May Easily Be Mistaken For Machine DefectsColor settings are not correctly adjusted Phenomena That May Easily Be Mistaken For Machine DefectsWarranty And After-Service Specifications