Toshiba TLP-SX3500 user manual Troubleshooting, Related Messages

Page 49

Troubleshooting

Related Messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.

memo Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

CHANGE THE LAMP

The time the lamp timer has counted is approaching

2000 hours.

 

AFTER REPLACING LAMP,

Preparation of a new lamp, and an early lamp change is

recommended. After you have change the lamp, please be sure

RESET THE LAMP TIMER.

to reset the lamp timer.

 

 

 

CHANGE THE LAMP

The time the lamp timer has counted is approaching

2000 hours, so a lamp change within ** hours is

 

AFTER REPLACING LAMP,

recommended.

When lamp usage reaches 2000 hours, the power will

RESET THE LAMP TIMER.

automatically be turned off.

 

THE POWER WILL TURN OFF

Please change the lamp by referring to the section “Lamp”.

After you have changed the lamp, please be sure to reset the

AFTER ** hr.

lamp timer.

 

 

 

CHANGE THE LAMP

As the time the lamp timer has counted has reached

 

AFTER REPLACING LAMP,

2000 hours, the power will soon be automatically

turned off.

RESET THE LAMP TIMER.

Please immediately turn the power off, and change the lamp by

 

THE POWER WILL TURN OFF

referring to the section “Lamp”. After changing the lamp, please

be sure to reset the lamp timer.

AFTER 0 hr.

 

 

 

 

(This table is continued to the following page.)

NOTE • A lamp has a finite product life. Lamps are characterized by the fact that,

after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this projector.

49

Image 49
Contents Projector TLP-SX3500Safety Precautions Before UsingSource of Light Power SourcesVentilation Heat CleaningWater and Moisture OverloadingObject and Liquid Entry AccessoriesDo not place the product vertically Stack InhibitedReplacement Parts Damage Requiring ServiceSafety Check ServicingSave Original Packing Materials Place and Manner of InstallationMoisture Condensation Avoid Volatile Liquid Important PrecautionsLCD Panel Disposal CopyrightsPreparation Projector FeaturesContents Projector Part NamesRemote Control Remote ControlControl Buttons Control Panel on the ProjectorArrangement Setting UpUsing The Lens Shift Buttons Adjusting The Projectors ElevatorConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector NetworkIf using a component signal If using a s-video signalIf using a Scart RGB input VCR/DVD Player ProjectorMonitorProjector Connecting The Power SupplySpeakerProjector Audio OUTAbout The Laser Pointer Remote ControlLoading Batteries Using The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning On The Power Power ON/OFFTurning Off The Power Operating Selecting An Input SignalSelecting The Aspect Ratio Using The Automatic Adjustment FeatureCorrecting The Keystone Distortion Adjusting The Picture PositionMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu ResetAspect WhisperPICTURE-1 Menu PICTURE-1 Menu Position PICTURE-2 MenuSize Color Space Input MenuVideo NR Input Menu PowerupP. Input P. PositPower OFF AdjustAuto Menu Search Auto MenuMyScreen Lock Screen MenuScreen Menu How to register your picture as the MyScreenOption Menu VolumeIR Remote Lamp TimeOption Menu Network Menu SetupDhcp Ex. Case of IP Address = Network Setting UpAbout disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Phenomena That May Easily Be Mistaken For Machine Defects Signal source does not correctly workPhenomena That May Easily Be Mistaken For Machine Defects Color settings are not correctly adjustedSpecifications Warranty And After-Service