Toshiba TLP-SX3500 user manual Input Menu, Color Space, Video NR

Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	COLOR SPACE	AUTO
PICTURE-1	COMPONENT	COMPONENT
PICTURE-2	VIDEO	AUTO
INPUT	3D-YCS	TURN OFF
AUTO	VIDEO NR	LOW
SCREEN	P. INP. INPUT	VIDEO
OPTION	P. INP. POSIT.
NETWORK	POWERUP INPUT RGB
: SELECT

Item Description

COLOR SPACE

Select a color space mode using the / buttons. : AUTO ￿ RGB ￿ SMPTE240 ￿ REC709 ￿ REC601

Selecting the AUTO automatically selects the optimum mode.

memo This item can be selected only at a RGB signal or a component video signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART RGB.

memo The AUTO operation may not work well at some signals. In such a case, select a suitable mode except the AUTO.

Select a function of COMPONENT port using the / buttons. :

COMPONENT ￿ SCART RGB

COMPONENT When the SCART RGB is selected, the COMPONENT port function as a port for a SCART RGB signal input. Please refer to the section “Connecting Your Devices”.

	Select a signal type mode using the	/	buttons. :
	AUTO ￿ NTSC ￿ PAL ￿ SECAM ￿ NTSC4.43 ￿ M-PAL ￿ N-PAL
	Selecting the AUTO automatically selects the optimum mode.
VIDEO	memo This item is performs only at a video signal from the VIDEO port or the S-
	VIDEO port. For a component video signal, the signal type is identified
	automatically independently of this function.
	memo The AUTO operation may not work well at some signals. If the picture
	becomes unstable (ex. a irregular picture, a color lack), please select the mode
	depending on the input signal.

Select the TURN ON or the TURN OFF using the / buttons. :

TURN ON ￿ TURN OFF

When the TURN ON is selected, the 3D-YCS mode works for a completely still

3D-YCSimage, or images with few motions.

VIDEO NR

memo This item performs only at a video signal of NTSC3.58.

memo When this function performs, the setting of the item “VIDEO NR” of this INPUT menu is not effective.

Select a noise reduction level using the / buttons. :

HIGH ￿ MIDDLE ￿ LOW

The noise on screen is reduced according to the selected level.

memo This item performs only at a video signal from the VIDEO port or the S- VIDEO port. At a video signal of NTSC3.58, this function performs only when the TURN OFF is selected to the item “3D-YSC” of this INPUT menu.

memo When this adjustment is excessive, certain degradation may appear on the picture.

(This table is continued to the following page.)

35