Toshiba B-SX4T-QQ owner manual Threshold Setting, Threshold setting procedure

Page 36

5. TROUBLESHOOTING

ENGLISH VERSION EO1-33034

5.4 Threshold Setting

5.4 Threshold Setting

NOTES:

1.If the [PAUSE] key is released within 3 seconds while in the pause state, the paper will not feed.

2.Failure to feed more than 1.5 labels may result in an incorrect threshold setting.

3.While the Print Head Block is raised, the [PAUSE] key does not work.

4.A paper end error cannot be detected during paper feed.

5.Selecting the Transmissive Sensor (for pre-printed labels) within software commands allows the printer to detect the proper print start position even when using pre-printed labels.

6.If using the Transmissive Sensor and the printer continues to print out of position even after setting the threshold, contact a TOSHIBA TEC service representative.

o maintain a constant print position the printer uses the Transmissive Sensor to detect the gap between labels by measuring the amount of light passing through the media. When the media is pre-printed, the darker %21/,1((or￿6;more￿7dense) 9inks￿￿￿can$interfere with this process causing paper jam errors. To get around this problem a minimum threshold can be set for the sensor in the following way.

T

 

Threshold setting procedure

1.

%￿6;￿7

9￿￿￿$

 

Turn the power ON. The printer is in stand by mode.

2.

state75. $160,66,9(

 

 

 

Load a pre-printed media roll.

 

%￿6;￿7

9￿￿￿$

 

3.

Press3$the86([PAUSE] key.

 

4.

The printer enters the pause mode.

5.

Press and hold the [PAUSE] key for at least 3 seconds in the pause

 

%￿6;￿7

9￿￿￿$

Black mark sensor

6.

75$160,66,9(

 

 

Feed gap sensor

The sensor type is displayed.

 

 

%￿6;￿7

9￿￿￿$

 

7.

Select5()/(&7,9(the sensor to be adjusted by pressing the [FEED] key.

 

 

 

 

 

 

 

 

[FEED]

key

 

 

 

 

 

 

 

9￿￿￿$

 

8.

%￿6;￿7

 

Press and hold the

[PAUSE] key until more than 1.5 labels (tags)

 

have been issued.

9￿￿￿$

 

 

%￿6;￿7

 

 

The media will continue to be fed until the [PAUSE] key is

 

released. (Threshold setting for the selected sensor is completed by

 

this3operation.)$86(

9￿￿￿$

 

 

%￿6;￿7

 

9.

Press21the/,1([RESTART] key.

 

10.

The printer is in stand-by.

 

11.

Send21an/,1(issue command from the PC to the printer.

E5- 4

Page 35 Page 37
Image 36
Page 35 Page 37
Contents SX4T-QQ/QP CE Compliance for EU only VorsichtWkhsoxj Precautions Request Regarding MaintenanceTable of Contents EA1-1 EA2-1EA3-1 EA4-1Introduction Features Product OverviewUnpacking Accessories Dimensions AppearanceFront View Rear ViewOperation Panel InteriorPrinter Setup PrecautionsProcedure before Operation Connecting the Cables to Your Printer GoriConnecting the Power Cord Turning the Printer Turning on the PrinterTurning OFF the Printer @ ? Loading the MediaDo not over-tighten the Locking Ring of the Supply Holder Setting the Feed Gap Sensor position Setting the Black Mark Sensor positionBatch mode Strip modeSTANDARD/PEEL OFF position Build-in rewinder mode Cut modeAuto Ribbon Saving Mode Loading the RibbonPcmcia Cards 3517 Test PrintFeed or Restart key Printer’s power OFF then back to on and check that the LCD Sample of the bar code test print label On Line Mode Operation PanelOperation Reset Dump Mode Maintenance CleaningPrint Head/Platen/ Sensors Covers and Panels Optional Cutter ModuleCare/Handling of the Media and Ribbon Troubleshooting Error MessagesError Messages Problems/Causes Solutions Restart keyPossible Problems Error Messages Problems/Cause SolutionsPossible Problems Causes Solutions Removing Jammed Media Do not use any tool that may damage the Print HeadThreshold Setting Threshold setting procedureAppendix 1 Specifications A1.1 PrinterModel A1.2 Options A1.3 MediaA1.3.1 Media Type LabelA1.3.2 Detection Area of the Transmissive Sensor LabelA1.3.3 Detection Area of the Reflective Sensor A1.3.4 Effective Print AreaTag paper with square holes A1.4 Ribbon Figure below shows the effective print area on the mediaSymbols in the message Appendix 2 Messages and LedsFollowing message appears Appendix 3 Interface „Interface CablesAppendix 4 Print Samples Interleaved 2 CODE39 Standard JAN13, EAN13EAN13+2 digits EAN13+5 digits CODE39 Full AsciiUPC-A+5 digits Industrial 2RSS-14 RSS-14 Stacked RSS LimitedGlossaries Bar codePrint head element USB Universal Serial BusIndex Index Page Page EO1-33034

B-SX4T-QQ specifications

The Toshiba B-SX4T-QQ is a robust and versatile industrial printer designed to meet various labeling and printing needs across diverse industries. This printer stands out for its compact design, making it suitable for environments where space is at a premium. With its advanced features and technologies, the B-SX4T-QQ provides exceptional performance and reliability.

At the heart of the B-SX4T-QQ is its high-resolution printing capability. It offers a print resolution of up to 300 dpi, which guarantees crisp and clear labels, barcodes, and graphics. This high resolution is vital for applications requiring fine detail, such as small labels used in electronics or pharmaceuticals.

One of the most remarkable features of the B-SX4T-QQ is its dual-technology printing capability. It can operate with both thermal transfer and direct thermal printing methods, providing flexibility for various labeling materials and applications. This adaptability allows users to choose the best printing method based on the specific media and the intended use of the labels.

The printer is equipped with a fast processing speed, capable of producing high-quality prints at a rate of up to 6 inches per second. This efficiency is essential for high-volume printing environments, where time and productivity are critical. Accompanied by a large media capacity, the B-SX4T-QQ minimizes downtime caused by the need for frequent media replacement.

Connectivity is another highlight of the Toshiba B-SX4T-QQ. It supports multiple interfaces, including USB, serial, and Ethernet, facilitating seamless integration with existing systems and networks. This versatility makes it compatible with various operating environments, enhancing workflow efficiency.

The B-SX4T-QQ is built with durability in mind. Housed in a rugged casing, it is designed to withstand the rigors of industrial use. Its reliable performance is further enhanced by enhanced features such as a user-friendly LCD display and intuitive control panel, making operation and monitoring straightforward.

In terms of software compatibility, the printer supports multiple programming languages, including PPL and ZPL, which ensures ease of integration with various applications. This capability is particularly beneficial for businesses that require custom label designs and specific printing configurations.

Overall, the Toshiba B-SX4T-QQ is an excellent choice for businesses looking for a reliable, versatile, and high-performance industrial printer. Its combination of advanced features, robust design, and ease of use positions it as a valuable asset in any labeling operation.
Top Page Image Contents