Toshiba B-SX4T-QP manual @ ?, Loading the Media

Page 17

2. PRINTER SETUP

ENGLISH VERSION EO1-33034

2.7 Loading the Media

2.7 Loading the Media

WARNING!

1.Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to load the media once the printer has stopped moving completely.

2.The Print Head becomes hot immediately after printing. Allow it to cool before loading the media.

3.To avoid injury, be careful not to trap your fingers while opening or closing the cover.

CAUTION!

Be careful not to touch the Print Head Element when raising the Print Head Block. Failure to do this may cause missing dots by static electricity or other print quality problems.

NOTES:

1.When the Head Lever is turned to Free position, the Print Head is raised.

2.To allow printing the Head Lever must be set to Lock position. (This ensures that the Print Head is closed.) There are two head pressure levels in the Lock position. Set the Head Lever depending on the media type:

Position ?: Labels

Position @: Tags However, proper position may differ depending on media. For details, refer to TOSHIBA TEC authorised service representative.

3.Do not turn the Locking Ring counter-clockwise too far or it may come off the Supply Holder.

The following procedure shows the steps to properly load the media into the printer so that it feeds straight and true through the printer.

The printer prints both labels and tags.

1.Turn off the power and open the Top Cover.

2.Turn the Head Lever to Free position, then release the Ribbon Shaft Holder Plate.

3.Open the Print Head Block.

Print Head Block

Top Cover

 

@ ?

Head Lever

Ribbon Shaft

Holder Plate

4.Turn the Locking Ring counterclockwise and remove the Supply Holder from the Supply Shaft.

Locking Ring

Supply Shaft

Supply Holder

E2- 6

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SX4T-QQ/QP Vorsicht CE Compliance for EU onlySX4T-QQ/QP Wkhsoxj Request Regarding Maintenance PrecautionsTable of Contents EA2-1 EA1-1EA3-1 EA4-1Unpacking Introduction FeaturesProduct Overview Accessories Appearance DimensionsFront View Rear ViewInterior Operation PanelPrecautions Printer SetupProcedure before Operation Gori Connecting the Cables to Your PrinterConnecting the Power Cord Turning OFF the Printer Turning the PrinterTurning on the Printer Loading the Media @ ?Do not over-tighten the Locking Ring of the Supply Holder Setting the Black Mark Sensor position Setting the Feed Gap Sensor positionSTANDARD/PEEL OFF position Batch modeStrip mode Cut mode Build-in rewinder modeLoading the Ribbon Auto Ribbon Saving ModePcmcia Cards Test Print 3517Feed or Restart key Printer’s power OFF then back to on and check that the LCD Sample of the bar code test print label Operation Panel On Line ModeOperation Reset Dump Mode Print Head/Platen/ Sensors MaintenanceCleaning Optional Cutter Module Covers and PanelsCare/Handling of the Media and Ribbon Error Messages TroubleshootingError Messages Problems/Causes Solutions Restart keyPossible Problems Causes Solutions Possible ProblemsError Messages Problems/Cause Solutions Do not use any tool that may damage the Print Head Removing Jammed MediaThreshold setting procedure Threshold SettingModel Appendix 1 SpecificationsA1.1 Printer A1.3 Media A1.2 OptionsA1.3.1 Media Type LabelLabel A1.3.2 Detection Area of the Transmissive SensorTag paper with square holes A1.3.3 Detection Area of the Reflective SensorA1.3.4 Effective Print Area Figure below shows the effective print area on the media A1.4 RibbonAppendix 2 Messages and Leds Symbols in the messageFollowing message appears „Interface Cables Appendix 3 InterfaceAppendix 4 Print Samples JAN13, EAN13 Interleaved 2 CODE39 StandardEAN13+2 digits EAN13+5 digits CODE39 Full AsciiIndustrial 2 UPC-A+5 digitsRSS-14 RSS-14 Stacked RSS LimitedBar code GlossariesUSB Universal Serial Bus Print head elementIndex Index EO1-33034

B-SX4T-QP specifications

The Toshiba B-SX4T-QP is a versatile and efficient industrial barcode printer that has garnered attention for its combination of advanced technology and user-friendly features. Designed to meet the demands of various industries, the B-SX4T-QP plays a crucial role in enhancing operational efficiency and maintaining productivity in environments such as manufacturing, logistics, and retail.

One of the standout features of the B-SX4T-QP is its high-resolution printing capability. The printer offers a resolution of up to 300 dpi, ensuring that barcodes, text, and graphics are printed with exceptional clarity and precision. This is especially important for applications that require high-quality labels, such as those found in healthcare and pharmaceuticals. The printer can handle media widths of up to 4 inches, accommodating a wide range of label sizes and formats.

The B-SX4T-QP utilizes advanced thermal transfer and direct thermal printing technologies, which allows users to choose the method that best suits their printing needs. The thermal transfer method provides durability for labels that are exposed to harsh conditions, while direct thermal printing is ideal for short-term applications where label longevity is not a concern.

Another significant characteristic of the B-SX4T-QP is its high-speed printing capability. The printer can deliver print speeds of up to 8 inches per second, allowing for quick label production and reducing wait times in busy operational settings. This speed is complemented by a robust and reliable design, ensuring that the printer can withstand the rigors of industrial environments.

Connectivity options are abundant with the B-SX4T-QP. The printer supports various interfaces including USB, parallel, serial, and Ethernet, allowing for seamless integration into existing systems. This flexibility makes it easy for businesses to incorporate the printer into their workflows, regardless of their current technology infrastructure.

In addition to its impressive printing capabilities, the B-SX4T-QP is known for its ease of use. The printer features a user-friendly interface, making it accessible for operators of varying skill levels. It also offers features like an easy-to-replace ribbon and label loading system, minimizing downtime and ensuring that label production can resume quickly.

Overall, the Toshiba B-SX4T-QP industrial barcode printer stands out for its combination of high-resolution printing, speed, durability, and user-friendly design. These characteristics make it an ideal choice for businesses looking to optimize their printing processes and enhance overall productivity. Whether in manufacturing, logistics, or retail, the B-SX4T-QP proves to be a reliable partner in achieving labeling and printing success.
Top Page Image Contents