Toshiba B-SX4T-QP manual Build-in rewinder mode, Cut mode

Page 21

2. PRINTER SETUP

ENGLISH VERSION EO1-33034

2.7 Loading the Media

2.7Loading the Media (Cont.)

NOTE:

Be sure to set the Selection Switch to REWINDER position.

ADJUSTMENT:

If the media skews when using the Built-in Rewinder, turn the Adjustment Knob of the Rewinder Guide Plate to correct the media feed. Clockwise turn moves the Rewinder Guide Plate forward and counter-clockwise moves it backward.

When the media skews to the right:

Loosen the SM-4x8 screw, turn the Adjustment Knob clockwise, and then tighten the SM-4x8 screw when the Rewinder Guide Plate is positioned correctly.

When the media skews to the left: Loosen the SM-4x8 screw, turn the Adjustment Knob counter- clockwise, and tighten the SM- 4x8 screw when the Rewinder Guide Plate is positioned correctly.

WARNING!

The cutter is sharp, so care must be taken not to injure yourself when handling the cutter.

CAUTION!

1.Be sure to cut the backing paper of the label. Cutting labels will cause the glue to stick to the cutter which may affect the cutter quality and shorten the cutter life.

2.Use of tag paper when the thickness exceeds the specified value may affect the cutter life.

NOTE:

When using the Rotary Cutter, be sure to install the Ribbon Saving Module (B-9904-R-QM).

Failure to do this may cause a paper jam or ribbon error.

Build-in rewinder mode

The Rewinder Assembly of the Strip Module can be used in batch mode to take up the printed media as a Built-in Rewinder.

(1)Remove the two Black Screws to detach the Front Plate.

(2)Attach the Rewinder Guide Plate enclosed with the optional Strip Module to the Strip Plate with the SMW-4x8 sems screws.

(3)Insert the media under the Rewinder Guide Plate.

(4)Wind the media onto the Take-up Spool and fix it in position with the Take-up Clip.

(5)Rotate the Take-up Spool counterclockwise a few times to remove any slack in the media.

(6)Set the Selection Switch mounted on the Rewinder Assembly to REWINDER position.

SMW-4x8 Screw

Rewinder

Guide Plate

Adjustment Knob

SM-4x8 Screw

Cut mode

When the optional Cutter Module is fitted, the media is automatically cut. A swing cutter and a rotary cutter are available as an option, but they are used in the same way.

Insert the leading edge of the media into the Media Outlet of the Cutter Module.

Cutter Module

Media

Media Outlet

13.If the loaded media is direct thermal media (a chemically treated surface), the media loading procedure is now completed. Close the Ribbon Shaft Holder Plate, and turn the Head Lever to Lock position to close. Then, close the Top Cover.

If the media is thermal transfer media, it is also necessary to load a ribbon. Refer to Section 2.8 Loading the Ribbon.

E2-10

Page 20 Page 22
Image 21
Page 20 Page 22
Contents SX4T-QQ/QP Vorsicht CE Compliance for EU onlySX4T-QQ/QP Wkhsoxj Request Regarding Maintenance PrecautionsTable of Contents EA2-1 EA1-1EA3-1 EA4-1Introduction Features Product OverviewUnpacking Accessories Appearance DimensionsFront View Rear ViewInterior Operation PanelPrecautions Printer SetupProcedure before Operation Gori Connecting the Cables to Your PrinterConnecting the Power Cord Turning the Printer Turning on the PrinterTurning OFF the Printer Loading the Media @ ?Do not over-tighten the Locking Ring of the Supply Holder Setting the Black Mark Sensor position Setting the Feed Gap Sensor positionBatch mode Strip modeSTANDARD/PEEL OFF position Cut mode Build-in rewinder modeLoading the Ribbon Auto Ribbon Saving ModePcmcia Cards Test Print 3517Feed or Restart key Printer’s power OFF then back to on and check that the LCD Sample of the bar code test print label Operation Panel On Line ModeOperation Reset Dump Mode Maintenance CleaningPrint Head/Platen/ Sensors Optional Cutter Module Covers and PanelsCare/Handling of the Media and Ribbon Error Messages TroubleshootingError Messages Problems/Causes Solutions Restart keyPossible Problems Error Messages Problems/Cause SolutionsPossible Problems Causes Solutions Do not use any tool that may damage the Print Head Removing Jammed MediaThreshold setting procedure Threshold SettingAppendix 1 Specifications A1.1 PrinterModel A1.3 Media A1.2 OptionsA1.3.1 Media Type LabelLabel A1.3.2 Detection Area of the Transmissive SensorA1.3.3 Detection Area of the Reflective Sensor A1.3.4 Effective Print AreaTag paper with square holes Figure below shows the effective print area on the media A1.4 RibbonAppendix 2 Messages and Leds Symbols in the messageFollowing message appears „Interface Cables Appendix 3 InterfaceAppendix 4 Print Samples JAN13, EAN13 Interleaved 2 CODE39 StandardEAN13+2 digits EAN13+5 digits CODE39 Full AsciiIndustrial 2 UPC-A+5 digitsRSS-14 RSS-14 Stacked RSS LimitedBar code GlossariesUSB Universal Serial Bus Print head elementIndex Index EO1-33034

B-SX4T-QP specifications

The Toshiba B-SX4T-QP is a versatile and efficient industrial barcode printer that has garnered attention for its combination of advanced technology and user-friendly features. Designed to meet the demands of various industries, the B-SX4T-QP plays a crucial role in enhancing operational efficiency and maintaining productivity in environments such as manufacturing, logistics, and retail.

One of the standout features of the B-SX4T-QP is its high-resolution printing capability. The printer offers a resolution of up to 300 dpi, ensuring that barcodes, text, and graphics are printed with exceptional clarity and precision. This is especially important for applications that require high-quality labels, such as those found in healthcare and pharmaceuticals. The printer can handle media widths of up to 4 inches, accommodating a wide range of label sizes and formats.

The B-SX4T-QP utilizes advanced thermal transfer and direct thermal printing technologies, which allows users to choose the method that best suits their printing needs. The thermal transfer method provides durability for labels that are exposed to harsh conditions, while direct thermal printing is ideal for short-term applications where label longevity is not a concern.

Another significant characteristic of the B-SX4T-QP is its high-speed printing capability. The printer can deliver print speeds of up to 8 inches per second, allowing for quick label production and reducing wait times in busy operational settings. This speed is complemented by a robust and reliable design, ensuring that the printer can withstand the rigors of industrial environments.

Connectivity options are abundant with the B-SX4T-QP. The printer supports various interfaces including USB, parallel, serial, and Ethernet, allowing for seamless integration into existing systems. This flexibility makes it easy for businesses to incorporate the printer into their workflows, regardless of their current technology infrastructure.

In addition to its impressive printing capabilities, the B-SX4T-QP is known for its ease of use. The printer features a user-friendly interface, making it accessible for operators of varying skill levels. It also offers features like an easy-to-replace ribbon and label loading system, minimizing downtime and ensuring that label production can resume quickly.

Overall, the Toshiba B-SX4T-QP industrial barcode printer stands out for its combination of high-resolution printing, speed, durability, and user-friendly design. These characteristics make it an ideal choice for businesses looking to optimize their printing processes and enhance overall productivity. Whether in manufacturing, logistics, or retail, the B-SX4T-QP proves to be a reliable partner in achieving labeling and printing success.
Top Page Image Contents