Toshiba B-SX4T-QP manual Threshold Setting, Threshold setting procedure

Page 37

5. TROUBLESHOOTING

ENGLISH VERSION EO1-33034

5.4 Threshold Setting

5.4 Threshold Setting

NOTES:

1.If the [PAUSE] key is released within 3 seconds while in the pause state, the paper will not feed.

2.Failure to feed more than 1.5 labels may result in an incorrect threshold setting.

3.While the Print Head Block is raised, the [PAUSE] key does not work.

4.A paper end error cannot be detected during paper feed.

5.Selecting the Transmissive Sensor (for pre-printed labels) within software commands allows the printer to detect the proper print start position even when using pre-printed labels.

6.If using the Transmissive Sensor and the printer continues to print out of position even after setting the threshold, contact a TOSHIBA TEC service representative.

o maintain a constant print position the printer uses the Transmissive Sensor to detect the gap between labels by measuring the amount of light passing through the media. When the media is pre-printed, the darker %21/,1((or￿6;more￿7dense) 9inks￿￿￿can$interfere with this process causing paper jam errors. To get around this problem a minimum threshold can be set for the sensor in the following way.

T

 

Threshold setting procedure

1.

%￿6;￿7

9￿￿￿$

 

Turn the power ON. The printer is in stand by mode.

2.

state75. $160,66,9(

 

 

 

Load a pre-printed media roll.

 

%￿6;￿7

9￿￿￿$

 

3.

Press3$the86([PAUSE] key.

 

4.

The printer enters the pause mode.

5.

Press and hold the [PAUSE] key for at least 3 seconds in the pause

 

%￿6;￿7

9￿￿￿$

Black mark sensor

6.

75$160,66,9(

 

 

Feed gap sensor

The sensor type is displayed.

 

 

%￿6;￿7

9￿￿￿$

 

7.

Select5()/(&7,9(the sensor to be adjusted by pressing the [FEED] key.

 

 

 

 

 

 

 

 

[FEED]

key

 

 

 

 

 

 

 

9￿￿￿$

 

8.

%￿6;￿7

 

Press and hold the

[PAUSE] key until more than 1.5 labels (tags)

 

have been issued.

9￿￿￿$

 

 

%￿6;￿7

 

 

The media will continue to be fed until the [PAUSE] key is

 

released. (Threshold setting for the selected sensor is completed by

 

this3operation.)$86(

9￿￿￿$

 

 

%￿6;￿7

 

9.

Press21the/,1([RESTART] key.

 

10.

The printer is in stand-by.

 

11.

Send21an/,1(issue command from the PC to the printer.

E5- 4

Page 36 Page 38
Image 37
Page 36 Page 38
Contents SX4T-QQ/QP Vorsicht CE Compliance for EU onlySX4T-QQ/QP Wkhsoxj Request Regarding Maintenance PrecautionsTable of Contents EA2-1 EA1-1EA3-1 EA4-1Product Overview Introduction FeaturesUnpacking Accessories Appearance DimensionsFront View Rear ViewInterior Operation PanelPrecautions Printer SetupProcedure before Operation Gori Connecting the Cables to Your PrinterConnecting the Power Cord Turning on the Printer Turning the PrinterTurning OFF the Printer Loading the Media @ ?Do not over-tighten the Locking Ring of the Supply Holder Setting the Black Mark Sensor position Setting the Feed Gap Sensor positionStrip mode Batch modeSTANDARD/PEEL OFF position Cut mode Build-in rewinder modeLoading the Ribbon Auto Ribbon Saving ModePcmcia Cards Test Print 3517Feed or Restart key Printer’s power OFF then back to on and check that the LCD Sample of the bar code test print label Operation Panel On Line ModeOperation Reset Dump Mode Cleaning MaintenancePrint Head/Platen/ Sensors Optional Cutter Module Covers and PanelsCare/Handling of the Media and Ribbon Error Messages TroubleshootingError Messages Problems/Causes Solutions Restart keyError Messages Problems/Cause Solutions Possible ProblemsPossible Problems Causes Solutions Do not use any tool that may damage the Print Head Removing Jammed MediaThreshold setting procedure Threshold SettingA1.1 Printer Appendix 1 SpecificationsModel A1.3 Media A1.2 OptionsA1.3.1 Media Type LabelLabel A1.3.2 Detection Area of the Transmissive SensorA1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective SensorTag paper with square holes Figure below shows the effective print area on the media A1.4 RibbonAppendix 2 Messages and Leds Symbols in the messageFollowing message appears „Interface Cables Appendix 3 InterfaceAppendix 4 Print Samples JAN13, EAN13 Interleaved 2 CODE39 StandardEAN13+2 digits EAN13+5 digits CODE39 Full AsciiIndustrial 2 UPC-A+5 digitsRSS-14 RSS-14 Stacked RSS LimitedBar code GlossariesUSB Universal Serial Bus Print head elementIndex Index EO1-33034

B-SX4T-QP specifications

The Toshiba B-SX4T-QP is a versatile and efficient industrial barcode printer that has garnered attention for its combination of advanced technology and user-friendly features. Designed to meet the demands of various industries, the B-SX4T-QP plays a crucial role in enhancing operational efficiency and maintaining productivity in environments such as manufacturing, logistics, and retail.

One of the standout features of the B-SX4T-QP is its high-resolution printing capability. The printer offers a resolution of up to 300 dpi, ensuring that barcodes, text, and graphics are printed with exceptional clarity and precision. This is especially important for applications that require high-quality labels, such as those found in healthcare and pharmaceuticals. The printer can handle media widths of up to 4 inches, accommodating a wide range of label sizes and formats.

The B-SX4T-QP utilizes advanced thermal transfer and direct thermal printing technologies, which allows users to choose the method that best suits their printing needs. The thermal transfer method provides durability for labels that are exposed to harsh conditions, while direct thermal printing is ideal for short-term applications where label longevity is not a concern.

Another significant characteristic of the B-SX4T-QP is its high-speed printing capability. The printer can deliver print speeds of up to 8 inches per second, allowing for quick label production and reducing wait times in busy operational settings. This speed is complemented by a robust and reliable design, ensuring that the printer can withstand the rigors of industrial environments.

Connectivity options are abundant with the B-SX4T-QP. The printer supports various interfaces including USB, parallel, serial, and Ethernet, allowing for seamless integration into existing systems. This flexibility makes it easy for businesses to incorporate the printer into their workflows, regardless of their current technology infrastructure.

In addition to its impressive printing capabilities, the B-SX4T-QP is known for its ease of use. The printer features a user-friendly interface, making it accessible for operators of varying skill levels. It also offers features like an easy-to-replace ribbon and label loading system, minimizing downtime and ensuring that label production can resume quickly.

Overall, the Toshiba B-SX4T-QP industrial barcode printer stands out for its combination of high-resolution printing, speed, durability, and user-friendly design. These characteristics make it an ideal choice for businesses looking to optimize their printing processes and enhance overall productivity. Whether in manufacturing, logistics, or retail, the B-SX4T-QP proves to be a reliable partner in achieving labeling and printing success.
Top Page Image Contents