2. MAJOR UNIT REPLACEMENT
2.7 Replacing the Platen
2.7 Replacing the Platen
1)Prior to replacing the platen, print out the maintenance counter for future reference.
2)Open the top cover, and raise the print head block by pressing down the head block release lever.
Top Cover |
| Print Head |
|
| |
|
| Head Block |
2 | 1 | Release Lever |
|
|
3)While pulling the top part of the platen holders L and R to the center of the printer, move them to the front of the printer to remove.
4)Push the platen and strip plate to the left side and then, move them to the front side to remove.
Platen Holder R
Platen Holder L
Platen
Shaft Holder
Strip Plate
5)Remove the shaft holder from the platen.
NOTE: Be careful not to damage the shaft holder when removing it.
Shaft Holder
Platen