3. PERIODIC MAINTENANCE PROCEDURE
3. PERIODIC MAINTENANCE PROCEDURE
3. PERIODIC MAINTENANCE PROCEDURE
WARNING!
1.Be sure to turn the power off before cleaning the cutter unit.
2.As the cutter blade is sharp, care should be taken not to injure yourself when cleaning.
All machines are generally delivered in their best condition. To maintain optimal operating condition and help gain maximum performance and life of machines, we would recommend you to conduct periodic maintenance. Doing this is also effective in preventing unexpected troubles and avoiding wasteful system down time, by which more benefit is produced to your customers and greater reliance is placed on the product quality.
Please refer to the following general maintenance procedure and perform periodic servicing.
NOTE: Before starting the periodic maintenance, be sure to read carefully and understand the Service Manuals, especially warnings, cautions and adjustment.
1.Ask an operator or a manager about any machine trouble.
2.Check the run distance on the maintenance counter.
3.Unplug the power cord, and then open the top cover and the head block.
Head
Block 
Power Cord
4.Clean the inside of the printer.
1)The entire inside of the printer should be cleaned.
2)Wipe the platen with a cloth moistened with alcohol.
Top
Cover
Platen