Toshiba B-EV4 manual Supply Specifications, Media Type

1. OUTLINE

EO18-33025

1.5 Supply Specifications

1.5 Supply Specifications

1.5.1 Media Type

The table below shows the size and shape of the media that can be used on this printer.

Label	Black Mark	Tag paper	Black Mark
	(on reverse side)		(on reverse side)

	g	g
	Cut position
	e	e
	f
d	Feed Direction	h
c		d
		c

							Unit: mm (inch)
	Issue mode		Batch mode			Strip mode	Cut mode
Item
c Width including backing paper						25.4 to 112 (1.0 to 4.41)
d Media width				22.4 to 109 (0.88 to 4.29)
		203 dpi	10 to 999			25.4 to 152.4	25.4 to 999
	Label		(0.39 to 39.3)			(1.0 to 6)	(1.0 to 39.3)
		300 dpi	10 to 457.2			25.4 to 152.4	25.4 to 457.2
e Media pitch			(0.39 to 18.0)			(1.0 to 6)	(1.0 to 18.0)
		203 dpi	10 to 999		-----		25.4 to 999
	Tag		(0.39 to 39.3)				(1.0 to 39.3)
		300 dpi	10 to 457.2		-----		25.4 to 457.2
			(0.39 to 18.0)				(1.0 to 18.0)
		203 dpi	8 to 997			23.4 to 150.4	19.4 to 993
f Media length			(0.31 to 39.25)			(0.92 to 5.92)	(1.0 to 39.1)
		300 dpi	8 to 455.2			23.4 to 150.4	19.4 to 451.2
			(0.31 to 17.9)			(0.92 to 5.92)	(1.0 to 17.76)
g Gap/black mark length			2.0 to 10.0 (0.08 to 0.39)				6.0 to 10.0
							(0.24 to 0.39)
h Black mark width						Min. 8.0 (0.31)
Thickness				0.06 to 0.19 (0.0024 to 0.0075)
Max. outer roll diameter				Ø127 (5)
			Ø214 (8.42): When the optional External Media Roll Hanger is used.
Roll direction			Outside (standard), Inside (Refer to NOTE 3)
Inner core diameter			25.4 to 38.1, or 76.2 (1 to 1.5, or 3) (See NOTE 2.)

1-9