Toshiba B-EV4 manual JP2 SD Card Slot

2. ELECTRONICS SPECIFICATIONS

EO18-33025

2.3 Description of the Main PC Board

JP2 (SD Card Slot):

Signal	Pin
	No.
CD/DAT3	1
CMD	2
VSS1	3
VDD	4
CLK	5
VSS2	6
DAT0	7
DAT1	8
DAT2	9
GND	10
GND	11
CD	12
WP	13

Type: MS3B11-KAA-0

This connector is connected to the SD Card.

Note: Recommended SD card specification.

•Supported DOS FAT file system.

•Folders stored in the SD card should be in the 8.3 filename format.

•Approved SD card manufacturers: SanDisk, Transcend.

SD V 1.0, V 1.1: 128MByte, 256MByte, 512MByte, 1GByte

SD V 2.0 (SDHC): 4GByte Class 6

JP3 (Ethernet):			Type: RJ45 with 2LEDs (Yellow and Green)
			This connector is used for the Ethernet (10BASET/100BASETX).
	Signal	Pin
		No.
	Tx+	1
	Tx-	2
	Rx+	3
	N/C	4
	N/C	5
	Rx-	6
	N/C	7
	N/C	8
	Cathode of	9
	the Yelleo LED
	+3.3V (Anode of	10
	the Yellow LED
	Cathode of	11
	the Green LED
	+3.3V (Anode of	12
	the Green LED

2-5