Toshiba 510D manual When using Windows 2000 Server

Page 3

If the "530LTX" label is attached on the connector panel:

Connection Type: Auto-Negotiation

Network Address: (Blank)

If the no label is attached on the connector panel:

Connection Type: Auto-Sense

Network Address: (Blank)

When using Windows 2000 Server

(1)Be sure to connect a mouse to the server.

If you use the server without a mouse, the keyboard may become inoperative.

(2)Installing Windows 2000 Server to the server

with an MO device.

Using an MO device with this server may prevent the correct installation of Windows 2000 Server. In this case, remove the MO device before installing Windows 2000 Server. As a precaution, replace the server’s panels before switching it on. For installing and removing the MO device, refer to MAGNIA User’s Guide (on the Documentation CD ROM), Chapter 2.

3/15

S00047-EN EH02 Rev. E

Image 3
Contents Toshiba Magnia 510D Read-Me-First Addendum When using Windows NT ServerNetwork adapter setup When using Windows 2000 Server S00047-EN EH02 Rev. E Tape Attached to the CPU Heat Sink About an accuracy of the Real-time-clock RTC When attaching or removing the Scsi HDD/ Scsi devicesMagnia 510D Components ListCheck your CPU Kit-LA’s maker S-Spec code by mark of CPU About the system Bios of MAGNIA510DCase of using Windows2000 Check System Bios revision by Post messagesHow to get the latest Bios Install the CPU Kit-LATo view CPU Stepping levels on your computer 11/15 S00047-EN EH02 Rev. E 12/15 S00047-EN EH02 Rev. E 13/15 S00047-EN EH02 Rev. E 14/15 S00047-EN EH02 Rev. E 15/15 S00047-EN EH02 Rev. E