Toshiba 510D manual When attaching or removing the Scsi HDD/ Scsi devices

Page 6

When attaching or removing the SCSI HDD/ SCSI devices

When attaching the side covers, take care to prevent the cables from being nipped between the side cover and the server.

About expansion of optional SCSI Host Adapter SCI1105W/J, SCI1107A/W/J and SCI3900U

An OS may not start depending on the connection. Perform the following setting for the SCSI host adapter not connected to an HDD starting OS.

(1)In the BIOS screen of SCSI Host adapter during start of system, press[Ctrl] + [A] to enter the BIOS setting menu.

(2)Select [Configure/View Host Adapter Setting] from the Options menu.

(3)Select [Advanced Configuration Options] from the Additional Options menu.

(4)Change the setting of [Host Adapter BIOS] of [Options Listed Below Have NO EFFECT if the BIOS is Disabled] from [Enabled] to [Disabled: scan bus].

About an accuracy of the Real-time-clock (RTC)

The RTC has a certain error, and the error is increased cumulatively if it is remained. To avoid the harmful influence for the operation, adjust the clock periodically.

A clock adjustment is enabled with each OS and BIOS setup utility. For details of adjustment, refer to each manual.

6/15

S00047-EN EH02 Rev. E

Image 6
Contents When using Windows NT Server Toshiba Magnia 510D Read-Me-First AddendumNetwork adapter setup When using Windows 2000 Server S00047-EN EH02 Rev. E Tape Attached to the CPU Heat Sink When attaching or removing the Scsi HDD/ Scsi devices About an accuracy of the Real-time-clock RTCComponents List Magnia 510DAbout the system Bios of MAGNIA510D Check your CPU Kit-LA’s maker S-Spec code by mark of CPUInstall the CPU Kit-LA Check System Bios revision by Post messagesHow to get the latest Bios Case of using Windows2000To view CPU Stepping levels on your computer 11/15 S00047-EN EH02 Rev. E 12/15 S00047-EN EH02 Rev. E 13/15 S00047-EN EH02 Rev. E 14/15 S00047-EN EH02 Rev. E 15/15 S00047-EN EH02 Rev. E