Initial network settings (continued)
How to use network function
•When connecting a computer and projector with
LAN, configure the both IP Addresses in the same network group.
If connecting in different network group, be sure to use a router. As for the settings of a router, ask the network administrator.
•Configure the IP CONFIG correctly. If the settings are not correct, the communication may be unavailable. For the detail, consult the network administrator.
•Depending on the settings of standby mode of the projector, LAN function may be unavailable. See page 32 for the detail of standby mode.
Glossary
For more detail of the glossary below, refer to the technical book that is commercially available.
Term | Description | |
|
| |
| Abbreviation for Dynamic Host | |
DHCP | Configuration Protocol. This | |
protocol automatically assigns IP | ||
| ||
| Address to networked devices. | |
|
| |
IP Address | Numerical address to identify | |
networked computers. | ||
| ||
|
| |
| A numeric value to define the | |
Subnet Mask | number of bits used for a network | |
address of a divided network (or | ||
| ||
| subnet) in an IP Address. | |
|
| |
| A server (or router) to communicate | |
Default Gateway | across networks (subnets) that are | |
| divided by Subnet Mask. | |
|
| |
| Abbreviation for Media Access | |
| Control Address. MAC Address is a | |
MAC Address | unique ID number assigned to each | |
network adapter. And this is based | ||
| ||
| on which data are sent and received | |
| between network adapters. | |
|
|
