Mitsubishi Electronics HC7800DW user manual Feature menu

Menu operation (continued)

FEATURE menu

opt.

FEATURE

	ASPECT	AUTO
	PASSWORD	DISPLAY
	FUNCTION	INPUT
	MENU POSITION	1.
	MENU DIMMER		OFF
	CINEMA MODE	AUTO
	REMOTE POSITION	AUTO
A Ë	LANGUAGE	English
	RESET ALL	OK

ITEM	SETTING	FUNCTION
ASPECT	AUTO	Select to change the aspect ratio automatically depending on the input
		signal.
	4:3	Select to project images with an aspect ratio of 4:3.
	16:9	Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
	ZOOM1	Select to enlarge and project images of CinemaScope size.
	ZOOM2	Select to enlarge and project images of Vista size.
	STRETCH	Select to enlarge to 16:9 and project of the images with an aspect ratio of
		4:3. (Non-linearly stretched.)
	ANAMORPHIC1	This mode is suitable for viewing 2.35:1-size images using the anamorphic
		lens.
		Use the p or q key to adjust the vertical display position.
		This mode doesn’t support input signals from personal computers.
	ANAMORPHIC2	This mode is suitable for viewing 16:9- or 4:3-size images or images input
		from personal computers using the anamorphic lens.
PASSWORD FUNCTION	2 options	Use to enable or cancel the password lock. See page 41 for details.
MENU POSITION	2 options	Use to change the position of the menu.
MENU DIMMER	ON / OFF	Use to reduce the brightness of the menu.
CINEMA MODE	AUTO	The film mode will be automatically activated when a film source signal is
		input.
		Select AUTO for normal use.
		When flicker occurs on the screen or jaggies on slanting lines are
		remarkable, select FILM when a film source signal is input or select VIDEO
		for other signals.
	VIDEO	The film mode will not be activated.
	FILM	Fixed to the film mode.

REMOTE POSITION AUTO / FRONT / Sets the position of remote infrared receiver to front or rear.

REAR

LANGUAGE	10 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding PASSWORD FUNCTION,
		LANGUAGE, and NETWORK) to the factory setting values.

•When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE (2.35:1) in the IMAGE menu, STRETCH cannot be selected for ASPECT.

•It may take a little while to carry out RESET ALL in the FEATURE menu.

EN-33