Troubleshooting (continued)
Others (continued)
Problem | Solution |
|
|
There is something | • Depending on the 3D image status, you may feel something wrong with the 3D |
wrong with the 3D | images. |
images. | Switch the 3D SYNC. setting of the projector to check whether or not the |
*The 3D glasses are | uncomfortable feeling is disappeared. |
sold separately. They | When the signal from the 3D emitter is interrupted, the power of the 3D glasses |
are not supplied with | automatically turns off 5 minutes after the interruption. Check that there is not any |
this product. | block in the communication area between the 3D emitter and the 3D glasses. |
| • The 3D glasses may become out of sync due to fluorescent light. Turn off the |
| fluorescent light. |
| • Is there any other 3D emitter or 3D image supporting television close to the 3D |
| glasses? |
| The 3D glasses work by receiving signals from the 3D emitter. Check that there is |
| no interference of the signals from other |
|
|
The indicator on the | • Does the battery of the 3D glasses die? |
3D glasses does not | Replace the battery with a new one if the indicator does not light up even when the |
light up even if the | power is turned on. |
power is turned on. |
|
*The 3D glasses are |
|
sold separately. They |
|
are not supplied with |
|
this product. |
|
If the following problem occurs after the lamp is replaced, check the following first.
Problem | Solution | |
|
| |
The projector does not | • Fit the lamp cover securely. (See pages 48 - 50.) | |
turn on. | • | Reset the lamp operating time. (See page 50.) |
|
|
|
The STATUS indicator | • | Reset the lamp operating time. (See page 50.) |
blinks. |
|
|
