Viewing 3D images (continued)
3D images viewing
This projector is able to display the following 3D display supporting broadcasts and signals as stereoscopic images. (As of January, 2011)
•3D images input from the recorder/player supporting 3D display. (Side by side, top and bottom, and frame packing)
•3D images by the digital terrestrial broadcasting and BS digital broadcasting. (Side by side) (For viewing 3D images with CATV (cable television), please consult CATV broadcasters or CATV providers.)
(For details about the supported 3D image signal formats, see “3D supported signals” on page 59.)
This projector is also able to display 3D images converted from 2D images.
3.Press the p or q button to select the desired item and press the t or u button to select the desired option.
3D MODE
If 3D images aren’t displayed properly with AUTO selected, select the video format (FRAME PACKING, SIDE BY SIDE, or TOP AND BOTTOM) suitable for the 3D image being displayed. Alternatively, you can select the video format using the 3D MODE button on the remote control.
3D SYNC.
If you feel uncomfortable while viewing 3D images, the
To view 3D images:
Preparation:
•Please read the 3D glasses user manual carefully before viewing the 3D images.
•Switching the 3D mode (such as 3D setting system) of the recorder/player may be required when projecting 3D images from the recorder/player supporting 3D display. Read the user manual of the recorder/player for details.
1.Project a 3D image on the screen.
2.Display the IMAGE menu.
(See page 29 for menu setting.)
3.Select 3D by pressing the p or q button.
|
|
|
|
|
|
|
|
|
| 3D | OFF |
|
|
|
|
|
|
|
|
4.Set 3D to ON
by pressing the t or u button.
•The projector will be ready to display 3D images.
5.Turn the power switch on the 3D glasses to ON.
6.Wear the 3D glasses.
•Now you are ready to view 3D images.
To change the 3D viewing mode:
When 3D images aren’t displayed properly, change the following setting using the menu.
(See page 29 for menu setting.)
1.Display the IMAGE menu and set the 3D option to ON
.
2.Press the ENTER button.
• The 3D menu will appear.
3D
3D MODE | AUTO |
|
|
3D SYNC. | NORMAL |
|
|
ON | |
CONVERSION | |
|
|
3D DEPTH | 5 |
|
|
To convert 2D images to 3D images:
1.Project a 2D image.
2.Perform steps 2 to 4 in the section “To view 3D images.”
3.Press the ENTER button.
• The 3D menu will appear.
4.Select 3D MODE by pressing the p or q button.
|
|
3D MODE | AUTO |
|
|
5.Set 3D MODE to AUTO by pressing the t or u button.
6.Select
|
|
ON | |
CONVERSION | |
|
|
7.Set
• Now 2D images are converted into 3D images.
8.Turn the power switch on the 3D glasses to ON and wear the 3D glasses.
9.Select 3D DEPTH by pressing the p or q button.
CONVERSION |
|
3D DEPTH | 5 |
10.Adjust the depth of the converted 3D images by pressing the t or u button.
•You can select the depth from 10 levels (1 to
10). As the level increases, the appearance of depth is enhanced.
•3D images converted from 2D images appear blurred due to conversion.
•To finish the conversion to 3D images, set 2D-
3D CONVERSION back to OFF.
