
Guide Specification –
9.1.2HTTP Familiarity
The RemotEye II shall provide a HTTP interface for the UPS to allow easy access of the UPS information from any machine with a web browser. At any time, a network workstation or management station shall be able to open a RemotEye II website. RemotEye II website shall enable the UPS system information to be configured and monitored remotely. RemotEye II shall provide access to 3 java applets for monitoring, event logging, and trend analysis.
9.1.3Shutdown Capability
The RemotEye II application software shall allow RemotEye II to remotely notify and shutdown selected network servers.
Network Adapter/External Hardware
AMD
512kB SRAM: 512kB Flash
Two asynchronous serial ports
10 BaseT
Toshiba UPS communication protocol
SNMP over UDP/IP : HTTP over TCP/IP:ARP, RARP, TFTP and
ICMP
MIB_II : Toshiba v1.2_MIB :JEM MIB : RFC 1628
Traffic LED for network : Status LED for status : Power LED for
Power
2 digit (default setting is Switches 1 and 2 off)
Temperature Range: 0 – 40 C
Relative Humidity: 10 – 80 %
Power Requirements: 12 VDC ungrounded
2.0 Watts Maximum
Dimensions: 5.28”(134mm) x 3.40”(86mm) x 1.10”(27mm) (LxWxH)
Weight: 0.38lbs(170g)
Certifications: FCC class A, UL, CUL, CE
9.2Remote Status Alarm Panel (RSAP)
The manufacturer shall optionally provide a RSAP that shall provide a
Input ON Bypass ON Inverter ON
Low Battery, AC Fail New alarm annunciation
Battery backup for the RSAP monitor.
15