Room setup, Stand mount, Wall mount fig

>0.3 m

Room setup

e80 / e81

e82 / e83

e8c

1.8 - 2.2 m

fig 1

e80 and e81 speakers are designed to be

used close to rear walls, either on the included wall brackets or elegante floor

stands. When used as rear speakers on a wall the optimum performance for surround sound will occur when the speakers are raised above head height (fig 2).

stand mount

If using the Mission elegante stands, slide the speaker support arm onto the stand upright and secure it with the fixing screw.

Carefully place the e80 or e81 speaker onto the speaker support arm, making sure that the front extensions of the arm slot into the recesses in the base of the speaker. Secure the speaker onto the arm using the fixing screw provided.

Make the connections to the terminals on the rear of the speaker, as explained on page 7.

wall mount (fig 3)

Using the rear plate of the wall bracket as a template, mark positions on the wall for four screw fixings. Screw the bracket to the wall using wall plugs and screws suitable for the wall construction and the weight of the loudspeaker.

Slide the speaker support arm onto the bracket and attach the base plate.

Make the connections to the terminals on the rear of the speaker, as explained on page 7.

e82 and e83 floorstanding speakers perform best when positioned more than 0.3m from a rear wall and away from corners (fig 1). Moving the speakers towards a wall or corner will increase the amount of bass, conversely moving the speakers away from a wall or corner will increase the clarity, articulation and tautness of bass. For good two-channel performance the speakers should be around 1.8 - 2.2m apart (fig 1). Where speakers are used as part of a multi- channel system this distance can be altered to suit your room furnishings. Spend some time moving the speakers and listening for the optimum performance.

e8as1 / e8as2

e8as1 and e8as2 subwoofers give clean and articulate bass when positioned at least 0.3m from a corner. However if a higher level of bass output is demanded, a corner position may provide this at the possible expense of some clarity. Again it is beneficial to spend time moving the subwoofer and listening for the optimum performance.

The e8as1 and e8as2 subwoofers are designed to provide the low frequency foundation and reproduction of low frequency effects in a music or home theatre system. The method of connection and setup will depend on the electronics that you connect to the subwoofer. Please read through the instructions to determine how best to use your subwoofer.

The e8c loudspeaker is designed to be placed underneath or above your TV screen to centre dialogue to the visuals on the screen. You can place it on a shelf above the screen, or use the included wall bracket to fix it to the wall. Alternatively you can place it on a shelf below the screen and tilt it upwards to face the listener if required.

shelf mount

The e8c is supplied fitted to a shelf stand. You may loosen the fixing screw and rotate the speaker on the stand to tilt it towards the head of the seated listener if required. Tighten the screw once the speaker is in the optimum position (fig 4).

wall mount (fig 5)

Remove the e8c from its stand. Slide the stand onto the wall bracket and secure it with the locking screw.

Make the connections to the terminals on the rear of the e8c through the elongated hole provided.

Carefully place the e8c speaker onto the speaker support arm. Secure the speaker onto the arm using the fixing screw provided.

above head height

fig 2

fig 3

fig 4

fig 5

Carefully place the speaker onto the speaker support arm, making sure that the front extensions of the arm slot into the recesses in the base of the speaker. Secure the speaker onto the arm using the fixing screw provided.