Toshiba GA-1200 quick start System Requirements, General requirements

Ethernet

TCP/IP, SMB, FTP, IPX/SPX

Windows file server (for storing files using SMB) FTP server (for storing files using FTP)

NetWare file server (for storing files using IPX/SPX) SMTP server (for Email transmission)

2 SYSTEM REQUIREMENTS

System Requirements

This section describes the environments required for respective options (Network Printer Kit, Scanner Upgrade Kit and Fax Kit). The functions available for users vary depending on the installed option and condition of use.

The copying functions of this equipment do not require any special environments. You can utilize these functions when you turn the power of this equipment ON.

General requirements

This equipment requires the following cables to connect with your computers:

For Ethernet Connection: 10BASE-T/100BASE-TX STP cable with a Category 5 RJ-45 connector

When the Scanner Upgrade Kit has been installed, the scanning function cannot be used with a computer connected to the equipment with a USB.

When the Network Printer Kit and Scanner Upgrade Kit are installed

This equipment requires the following environments for scanning functions as well as the print- ing functions:

Interface: Network protocol: Network server:

When the Network Printer Kit, Scanner Upgrade Kit and Fax Kit are installed

This equipment requires the following environments in order to enable the InternetFax functions and onramp/offramp gateway functions, as well as the printing functions, network fax functions and scanning functions:

Interface:	Ethernet
Network protocol:	TCP/IP, FTP
Network servers:	POP3 server (for InternetFax/Email reception)
	SMTP server (for InternetFax/Email transmission)

18 System Requirements