Important notes | Notes on safety |
Modules with
Systems and components that might be damaged by electrostatic discharge (ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following points under all circumstances:
●You must always discharge yourself of static charges (e.g. by touching a grounded object) before working.
●The equipment and tools you use must be free of static charges.
●Remove the power plug from the power socket before inserting or removing boards containing ESDs.
●Always hold boards with ESDs by their edges.
●Never touch pins or conductors on boards fitted with ESDs.
●Use a grounding cable designed for this purpose to connect yourself to the system unit as you install/deinstall the board.
●Place all components on a
IYou will find a detailed description for handling ESD components in the relevant European or international standards (EN
D2559 (TX150 S6) | Technical Manual | 9 |