74 MAX675VDII
English INSTALLATION
MANUAL
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
Connecting the parking brake cord to lamp ground allows you to watch TV/VTR/DVD video/video CD when
the parking brake is engaged.
When the parking brake cord is not connected, the monitor will not turn on.
If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking
brake while confirming safety, and then engage the parking brake again.

Connecting the Accessories

Connection to the external amplifier
The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder.
Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the main unit. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Note:
A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.
If the specified cord of the cellular phone is connected to the phone interrupt cord of the main
unit, the audio mute is available when the cellular phone is used.
Satellite Radio Receiver
When a Satellite Radio Receiver is to be connected, use the CeNET connector. For detailed
information,refer to the instruction manual of the Satellite Radio Receiver.
TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV tuner.
Navigation System (NAX970HD)
When the Navigation System is to be connected, connect the CeNET connector and the RGB terminal.
For detailed information, refer to the instruction manual of the Navigation System.
Parking brake lamp
+ cord to battery
Parking brake
Parking brake
signal cord
Parking brake cord
(Grass-green)
Electro-tap
Stopper
1. Place the Parking brake cord at the stopper, and
fold it back in the direction of the arrow.
2. Pass the Parking brake signal cord through, and
fold it back in the direction of the arrow.
Parking brake
signal cord
Parking brake cord
(Grass-green)
Parking brake
signal cord

How to attach the electro-tap