6. OPERATIONS
Basic Operations
English
Note:
•Be sure to read this chapter referring to the chapter “3. CONTROLS” (page 5).
CAUTION
CAUTION
When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.
Turning on and off the power
Note:
•Start the engine before using this unit.
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Start the engine. The illuminations on this unit light up.
Engine ON position
Adjusting the volume
1.Press the
•The volume level indicated in the display is in a range from 0 (min.) to 33 (max.).
CAUTION
CAUTION
While driving, keep the volume level at which external sounds can be heard.
Mute
1.When in the TUNER, Satellite Radio, VISUAL or TV mode, press the [p] button to turn the mute on and off.
When in the DVD PLAYER, iPod or changer mode, keep pressing the [p] button more than 1 second to turn the mute on and off.
•When the mute is turned on, “
” appears at the bottom left of the screen.
Opening the operation panel and adjusting the angle
Owner’s manual
2.Press the [&] (POWER) button to turn on the power.
* Pressing this button while the power is turned on turns off the back light of the liquid crystal panel.
3.To turn off the power, press and hold the [&] (POWER) button for more than 1 second.
Selecting a mode
1.Press the [SRC] button to display the Source menu.
* External equipment not connected to this unit is not displayed.
2.Touch the desired mode key.
●About the CT (Clock Time) display
•When the Navigation system is connected, the displayed clock data is based on the CT (clock time) data in the GPS data.
Open the operation panel when inserting/ejecting a disc.
The angle of the operation panel can be adjusted depending on the mounting angle of the unit or light coming into the car.
CAUTION
CAUTION
•Do not move the operation panel forcibly or do not apply strong force to the operation panel.
•When the operation panel is operating, be careful not to get your hand or finger caught between the operation panel and main unit or its mechanical parts.
•The driver should not operate the operation panel while driving.
MAX675VDII 21
