Basic Operations

English Owner’s manual

Performing the system check

3-1. Touch the []] key of the SYSTEM CHECK item.

3-2. Touch [Check] key at the top right of the

screen to perform the system check manually.

The system will be restarted after performing the system check.

Changing the output speaker for the cellular phone

When you connect your cellular phone to this unit using a separately sold adaptor, you can listen to your telephone calls on your car speakers.

The factory default setting is “RIGHT”.

To output the telephone calls, set the following TEL SWITCH item to “ON”.

3-1. Touch the [LEFT] or [RIGHT] key of the TEL SP item to set to “LEFT” or “RIGHT”.

LEFT:

Telephone calls are heard from the front left speaker connected to this unit.

RIGHT:

Telephone calls are heard from the front right speaker connected to this unit.

Note:

During cellular phone interrupts, setting this function is disabled.

Note:

This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

When you set this function to “OFF”, disconnect the cellular phone from the cable or turn off the power of the cellular phone.

Setting the voice input line for the cellular phone

When you connect your cellular phone to this unit, select the connection method of the adaptor box.

• The factory default setting is “CeNET”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [CeNET] or [AUX] key of the TEL SELECT item to set to “CeNET” or “AUX”.

CeNET:

Selects when the adaptor box is connected via the CeNET.

AUX:

Selects when the adaptor box is connected to Audio (left/right) of the Visual input terminal.

Note:

When setting to “AUX”, the VISUAL mode is altered to the ACCESSORY mode.

Cellular phone interrupt setting

• The factory default setting is “OFF”.

3-1. Touch the [ON], [OFF] or [MUTE] key of the TEL SWITCH item to set to “ON”, “OFF” or “MUTE”.

ON:

You can listen to your telephone calls from the speakers connected to this unit.

*When listening to your calls on your car speakers, you can adjust the volume using the [+]/[] buttons.

OFF:

This unit continues normal operation even when you use the cellular phone.

MUTE:

The sound from this unit is muted during telephone calls.

Switching CONNECT (connect)

Make the following settings when an external device is connected to the Visual terminal.

NAVI:

When a navigation system is connected.

*When the navigation system is connected, use the monitor lock function. Locking the monitor locks the screen size in F.WIDE mode (full wide) and the VTR system to NTSC.

OTHER:

For external devices other than a navigation system.

NONE:

When no external device is connected.

• The factory default setting is “NONE”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [NAVI], [OTHER] or [NONE] key of the CONNECT item to set the function to “NAVI”, “OTHER” or “NONE”.

26 MAX675VDII

Page 22
Image 22
Clarion MAX675VDII Basic Operations Performing the system check, Changing the output speaker for the cellular phone