5. INSTALLING THE MAIN UNIT
This unit is designed for fixed installation in the dashboard.
1.When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7.
2.Wire as shown in Section 7 (see page 72).
3.Reassemble and secure the unit in the dashboard and set the face panel and center panel.
English INSTALLATION MANUAL
Mounting Screw Holes (Side View of the Main Unit) | |
For NISSAN vehicle | For TOYOTA vehicle |
Installing the Main Unit in a NISSAN Vehicle
Main Unit
Finisher (*1)
Mounting bracket
(1 pair for the left and right sides)
Figure 6
Note:
*1: Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main unit.
(attached to the main unit)
MAX675VDII 69