NAVI Operations
NAVI functions
Note:
•Hereafter in this section, the Navigation system will be called as “NAVI”.
•When the Clarion NAVI NAX970HD is connected, the following functions are available:
•Showing the NAVI display
•Operation by using the panel side buttons
•NAVI guidance voice interruption
•When a voice interrupt of the NAVI arises during 2- ZONE ON, the sound of the MAIN zone is muted, and the sound of the SUB zone is output normally. When it arises during
•Since the Clarion NAVI (NAX970HD) is automatically recognized, you can omit the below- mentioned CONNECT setting.
●AV screen
[MAP] key
When the image interruption from the NAVI arises, the screen will be changed from the AV screen to the NAVI screen. When the interruption is finished, the screen will return to the previous AV screen.
●NAVI screen
English Owner’s manual
Setting NAVI as external input equipment
Perform this setting after connecting NAVI.
• The factory default setting is “NONE”.
1.Press the [ADJ] button, and touch the [GENERAL] key.
2.Touch the [C] key to display the next menu screen, and touch the [NAVI], [OTHER] or [NONE] key of the CONNECT item to set the function.
NAVI:
Select when a NAVI is connected.
Control of it can be made only from the remote control unit.
OTHER:
Select for external devices other than a NAVI. NONE:
Select when no external device is connected.
NAVI operation
Changes between the NAVI display and the Audio/Visual (hereinafter, referred as “AV”) display.
Note:
•The
When the other NAVI is connected, use the [MAP] button to switch the screen mode.
[AV] key
Audio operations made in the NAVI mode will be indicated for about 2 seconds at the bottom of the NAVI screen.
●Operations using the buttons
[MAP] button
•The MAP screen of the NAVI mode is displayed.
•When in the AV mode, it is changed to the NAVI mode.
[MENU] button
•When in the NAVI mode, the MENU screen of the NAVI mode is displayed.
MAX675VDII 57
