Sanyo VPC-CA100GX Shooting with the face chaser function, Set the face chaser setting to

Shooting with the face chaser function

1 Set the face chaser setting to -.

hWhen the subject is successfully targeted, a green double-frame appears superimposed on the subject.

2 When capturing a still image, press the [O] button halfway.

3 Press the [O] or [R] button.

<To capture a still image>

hGently press the [O] button all the way to capture the photo.

<To record a video clip>

h Recording begins when the [R] button is pressed.

h During recording, an orange frame appears superimposed on the subject.

CAUTION

About recording with the subject chaser

i The chaser function does not work while the digital zoom is being used. i The chaser function does not work when zooming in or out.

i The chaser function may not work when the subject in the monitor is relatively small or appears dark.

i If the scene select function setting was fireworks + or landscape +, it automatically changes to =.

When using the face chaser function

i The light measuring mode changes to multi-section light measuring.

95English