INSTALLING THE CARD

Be sure to format a newly purchased card or one that was used in another device before using it in your camera (pages 124 and 134). If an unformatted card is used, the card itself may become unusable.

Battery cover lock

4 Close

2 Open

Battery cover

SETUP

1Push the battery cover lock to the right to release it.

<When removing the card...>

hTo remove the card, press it in, and then release. The card will protrude slightly, and you can then pull it out.

3Insert the card with the label side facing up.

5Push the battery cover lock to the left to lock it.

The colored label is visible when the battery cover lock is not completely closed. Be sure to close the lock completely so that the colored label is not visible.

1 Push the card in

Colored label

2Pull it out

English 22

Page 47
Image 47
Sanyo VPC-CA100EX, VPC-CA100GX, VPC-CA100PX, VPC-CA100TA, VPC-CA102 Installing the Card, When removing the card